name: onec-protocol-tool-setup description: Set up and verify tooling for capturing and decoding 1C RAC/admin protocol traffic (proxy/capture, decode, and dependencies). Use when tooling is missing, capture pipeline fails, logs are empty, decode drift occurs, or the environment prerequisites are unknown. metadata: version: "1.0.1"

Onec Protocol Tool Setup

Overview

Verify that the capture pipeline and decode tools are installed, reachable, and producing usable streams before deeper protocol work.

Workflow

1. Read references/tooling_checklist.md and run the pre-flight checks.
2. Confirm ports/paths:

• LISTEN_ADDR is free.
• ./logs/ and ./artifacts/rac/ are writable.

1. Run a control capture:

• One known command with expected output.
• Confirm streams exist and rac_decode parses them.

1. If any step fails, use the troubleshooting section in the checklist and report the exact failing command/output.

Output Requirements

When reporting setup results:

1. List tools verified and missing.
2. Provide the exact command(s) used for the control capture.
3. State whether rac_decode parsed both directions.
4. If blocked, list the smallest next action needed to proceed.