version: "1.0.0" name: rtl-p5s-protocol-policy description: "Internal reference: rtl p5s protocol policy (agent-loaded; do not invoke)." user-invocable: false

Protocol Verification Policy

Protocol Signal Naming Conventions

Protocol SVA assertions MUST use the project port naming conventions (CLAUDE.md):

AXI signal naming (with i_/o_ prefix based on slave perspective):

• Write Address: i_awvalid, o_awready, i_awaddr, i_awlen, i_awsize, i_awburst
• Write Data: i_wvalid, o_wready, i_wdata, i_wstrb, i_wlast
• Write Response: o_bvalid, i_bready, o_bresp
• Read Address: i_arvalid, o_arready, i_araddr, i_arlen, i_arsize, i_arburst
• Read Data: o_rvalid, i_rready, o_rdata, o_rresp, o_rlast

AHB signal naming (slave perspective):

• i_hsel, i_haddr, i_htrans, i_hwrite, i_hsize, i_hburst
• i_hwdata, o_hrdata, o_hready, o_hresp

APB signal naming (slave perspective):

• i_psel, i_penable, i_pwrite, i_paddr, i_pwdata
• o_prdata, o_pready, o_pslverr

Clock/Reset: {domain}_clk (e.g., axi_clk or sys_clk), {domain}_rst_n NOT: ACLK, ARESETn, clk_i, rst_ni

Note: For master-perspective modules, i_/o_ directions are reversed.

Escalation & Stop Conditions

• Protocol type cannot be identified from RTL → ask user to specify (AXI3/AXI4/AXI4-Lite/AHB-Lite/APB3)
• Protocol violation found → report with waveform evidence, do NOT auto-fix RTL
• Assertions cause simulation performance >10x slowdown → report to user, suggest formal tool
• RTL uses non-conformant signal names (e.g., AWVALID) → flag as convention violation, request fix before protocol verification

Final Checklist

• [ ] Bus protocol type identified
• [ ] All protocol signals use i_/o_ prefix convention
• [ ] SVA assertions use correct signal names (i_awvalid, o_awready, sys_clk, etc.)
• [ ] SVA assertions written covering all mandatory protocol rules
• [ ] Assertions bound and simulation run via Bash CLI
• [ ] reviews/phase-5-verify/protocol-report.md written with PASS/FAIL
• [ ] Violations reported with cycle numbers
• [ ] RTL not modified

AXI4 Full Rules and Key Protocol Rules

For AXI4 full (not Lite), also check: burst length/size consistency, wrap alignment, exclusive access. For multi-clock designs, use axi_clk/axi_rst_n in assertion clock instead of sys_clk. Protocol assertions can also be run with SymbiYosys formal (via rtl-p5s-sva-check skill) for exhaustive coverage.

Key AXI protocol rules to verify:

1. VALID must not depend on READY — xVALID must assert independently
2. VALID must hold until handshake — cannot drop VALID before READY
3. Data/control stable while waiting — no changes while VALID && !READY
4. Write response after last data — BVALID only after WLAST accepted
5. Read data ordering — RDATA returned in address request order (per ID)

See {plugin_root}/skills/rtl-p5s-protocol-verify/references/axi-protocol-rules.md for complete SVA assertion templates per channel, ordering rules, AXI4 vs AXI4-Lite differences, and common violations found in practice.