carla-simulator/carla-agentic-tools/replay-recording

Replay a CARLA recording

Paths. scripts/… and references/… below are relative to the

directory holding this SKILL.md. Your working directory is the user's

project, not that directory, so prefix them with its absolute path or the

command is not found.

Play back a .log produced by `record-simulation`. The server re-creates the recorded scene; play prints its summary. Confirm the replay by watching the followed actor or by inspecting the same log with `query-recording`.

The scene, the holders and the clock

play puts the world into the state a replay needs, in this order:

1. Stops local spawn holders. spawn-vehicles / spawn-walkers / a held

create-sensor stay resident by design, and each removes its own actors and restores the clock in a finally, so they are sent SIGINT rather than killed. --keep-scene skips all of this.

1. Puts the world back to asynchronous. The replayer runs server-side,

so no client has to tick anything. If a client still owned a synchronous clock the replay would advance only as fast as that client ticked; worse, with the holder gone and the world left synchronous, nothing ticks at all and the replay appears to do nothing.

1. Clears the scene. A replay RECREATES the actors in the log, so it adds

to the world rather than replacing it: replaying a 50-car log into a live 50-car scene gives 100 vehicles driving through each other. Traffic signs and the spectator survive — they belong to the map, not the scene.

The corollary for recording: the recorder is free to be the synchronous client. Capturing under a fixed timestep is what makes a log reproducible, and it costs the replay nothing, because playback is driven by the server.

Holder detection reads /proc argv rather than matching a command-line substring — a shell whose own command line merely quotes vehicles.py spawn --hold matches a substring search and gets signalled, which kills the caller by accident.

Instructions

Progress:
- [ ] Step 1: Check prerequisites (bash scripts/check_env.sh), clear FAILs
- [ ] Step 2: (optional) inspect the log first (query-recording) to pick times/ids
- [ ] Step 3: Play — whole log, or a window; set speed / follow as asked
- [ ] Step 4: Stop when done (decide keep-actors)

Commands need CARLA_HOST/CARLA_PORT from scripts/env.sh.

Step 1: Check prerequisites

bash scripts/check_env.sh

Step 3: Play

source scripts/env.sh
 
# whole log at real time
python3 scripts/replay.py play --file /tmp/run.log
 
# a 10s window from t=5s, following actor 87, at 2x
python3 scripts/replay.py play --file /tmp/run.log --start 5 --duration 10 --follow 87 --time-factor 2.0
 
# regenerate sensors and restore the recorded weather
python3 scripts/replay.py play --file /tmp/run.log --replay-sensors --replay-weather
 
# change speed of the running replay, e.g. slow motion
python3 scripts/replay.py speed --factor 0.25

--start is seconds from the beginning (negative counts from the end), --duration 0 plays to the end, --follow 0 means don't move the spectator.

Step 4: Stop

python3 scripts/replay.py stop                 # remove replayed actors
python3 scripts/replay.py stop --keep-actors   # leave them in the world

Examples

Example 1: watch it back

User says: "replay that run"

play --file /tmp/run.log. Server summary prints; watch in the CARLA window.

Example 2: slow-mo on one car

User says: "replay following car 87 at quarter speed"

play --file /tmp/run.log --follow 87 --time-factor 0.25.

Example 3: regenerate camera data from a recording

User says: "I need camera frames from that recording"

Re-attach the sensors you want (create-sensor / read-sensor skills), then play --file /tmp/run.log --replay-sensors. The recorder stored no images; they are regenerated now.

Troubleshooting

Problem: `play` prints a file-not-found / parse error Cause: the .log is not on the server at that path. Solution: use the server-side path; a relative name resolves under CarlaUE4/Saved/. Verify with query-recording info first.

Problem: replay shows nothing / wrong map Cause: the log was recorded on a different map than the one loaded. Solution: replay loads the recorded map automatically; for OpenDRIVE-only logs use --map-override <Name>.

Problem: no sensor images during replay Cause: --replay-sensors not set, or no sensors attached. Solution: attach sensors, then replay with --replay-sensors.

Problem: actors vanish when replay ends Cause: stop removes replayed actors by default. Solution: stop --keep-actors to keep them.

Outputs

Server state: the recorded scene re-enacted on the running server. Optionally regenerated sensor data (with --replay-sensors). No file is produced.

Detail (time window semantics, sensors/weather, map override, sync interaction) in references/replay.md.