<< All versions

Skill v2.0.0

currentAutomated scan100/100
cyberstrikeus/cyberstrike/cis-azure-compute-2-1-20
──Details
PublishedNovember 7, 2026 at 08:37 AM
Content Hashsha256:7da2e141bfc79c2a...
Git SHAf74406dd1736
──Files
Files (1 file, 2.9 KB)
SKILL.md2.9 KBactive
SKILL.md · 105 lines · 2.9 KB

name: cis-azure-compute-2.1.20 description: "Ensure all traffic is routed through the virtual network" category: cis-azure-compute version: "2.0.0" author: cyberstrike-official tags: [cis, azure, app-service, vnet-integration, outbound-traffic, route-all, network-security] cis_id: "2.1.20" cis_benchmark: "CIS Microsoft Azure Compute Services Benchmark v2.0.0" tech_stack: [azure] cwe_ids: [] chains_with: [] prerequisites: [] severity_boost: {}


Ensure all traffic is routed through the virtual network

Description

Enable vnetRouteAllEnabled to ensure all outbound traffic is routed through the integrated virtual network.

This recommendation should be applied after integrating an App Service app with a virtual network.

Rationale

Routing all outbound traffic through the virtual network enhances security.

Impact

Additional configuration may be required to ensure that traffic is routed properly.

Audit Procedure

Using Azure Portal

  1. Go to App Services.
  2. Click the name of an app.
  3. Under Settings, click Networking.
  4. Under Outbound traffic configuration, next to Virtual network integration, click the virtual network and subnet name.
  5. Under Application routing, ensure that the box next to Outbound internet traffic is checked.
  6. Repeat steps 1-5 for each app.

Using Azure CLI

Run the following command to list apps:

az webapp list

For each app, run the following command to get the virtual network traffic routing setting:

az webapp show --resource-group <resource-group-name> --name <app-name> --query vnetRouteAllEnabled

Ensure that true is returned.

Using Azure PowerShell

Not specifically documented for this control.

Expected Result

The vnetRouteAllEnabled setting should return true.

Remediation

Using Azure Portal

  1. Go to App Services.
  2. Click the name of an app.
  3. Under Settings, click Networking.
  4. Under Outbound traffic configuration, next to Virtual network integration, click the virtual network and subnet name.
  5. Under Application routing, check the box next to Outbound internet traffic.
  6. Click Apply.
  7. Repeat steps 1-6 for each app requiring remediation.

Using Azure CLI

For each app requiring remediation, run the following command to route all traffic through the virtual network:

az resource update --resource-group <resource-group-name> --name <app-name> --resource-type "Microsoft.Web/sites" --set properties.vnetRouteAllEnabled=true

Using Azure PowerShell

Not specifically documented for this control.

Default Value

For apps integrated with a virtual network, all traffic is routed through the virtual network by default.

References

  1. https://learn.microsoft.com/en-us/azure/app-service/configure-vnet-integration-routing#configure-application-routing
  2. https://learn.microsoft.com/en-us/cli/azure/webapp
  3. https://learn.microsoft.com/en-us/cli/azure/resource

Profile

Level 1 | Automated

All versions