faradworks/pinscope/extract-pintable

Extract Pin Table & Variant Info

Extract the pin table and variant/ordering information from a component datasheet and return it as structured JSON via the save_pintable tool.

Steps

1. Read the datasheet PDF

The datasheet PDF is provided in the user message. Focus on these sections:

• Pin configuration / pin assignment table — This is the primary target. Look for tables listing pin number, pin name, description, and alternate functions.
• Ordering information / part number decoder — Decode what each segment of the MPN means (package, temperature grade, packing, output voltage, etc.)
• Package information — Pin count, package type (QFP, BGA, SOT-23, etc.)

2. Extract the pin table

For every pin on the component, extract:

• number (int or str) — The pin number, or BGA ball coordinate like "A3"
• name (str) — The pin name exactly as printed in the datasheet (e.g., "VDD", "PA0/SPI0_CLK")
• description (str or null) — A brief description if the datasheet provides one
• functions (list[str] or null) — Alternate/multiplexed functions if the pin supports them

Rules for pin extraction:

• Include ALL pins — power, ground, NC, and signal pins
• Use pin names verbatim from the datasheet — do not rename or normalize
• For multiplexed pins, put the primary name in name and alternates in functions
• If the datasheet has separate tables for different packages, extract for the package matching the MPN
• Pay careful attention to pin numbering — off-by-one errors here break everything downstream

3. Extract package info

Decode the MPN and package details into a single PackageInfo:

• base_family (str) — The base part family (e.g., "MSPM0G3507" from "MSPM0G3507SPTR")
• package (str) — Package name (e.g., "LQFP-48", "SOT-23-5")
• pin_count (int) — Number of pins
• description (str) — Human-readable decoding of the full MPN (e.g., "MSPM0G3507, 48-pin LQFP, tape & reel")

Look for an "Ordering Information" or "Device Information" table in the datasheet — most datasheets have one.

4. Assign component subtype (taxonomy)

The existing IC taxonomy subtypes are provided in the system prompt under EXISTING IC TAXONOMY SUBTYPES. Pick the best matching subtype based on the component's MPN, package info, and pin names.

If no existing subtype fits, propose a new one following the dot-notation convention (ic.{category}.{specific}).

Set the chosen subtype on the component_subtype field.

5. Quality checks

Before producing output, verify:

• Pin count matches what the datasheet says for this package
• No duplicate pin numbers
• No pins are missing (compare against the datasheet's stated pin count)
• Pin names look reasonable (not garbled OCR artifacts)

6. Validate and output

Validate your extraction against the output schema:

python3 /skills/extract-pintable/validate.py '<your JSON here>'

If validation passes, call the save_pintable tool with the structured result. Do NOT write files to disk — use the tool.