iowarp/clio-agent-marketplace/am-process-parameters

Record the full parameter set relevant to the process family: for powder bed fusion, laser power, scan speed, hatch spacing, layer thickness, scan strategy, and preheat/chamber temperature; for DED, deposition rate, travel speed, and interpass temperature. A single derived metric (energy density) discards information the individual parameters carry separately.

State which parameters were validated for the specific material/machine combination versus assumed from a similar system — a parameter set tuned on one powder lot, machine, or alloy does not transfer without requalification, because absorptivity, thermal conductivity, and melting range differ by material.

Distinguish a nominal (programmed) parameter from a verified (measured) one — actual laser power, layer thickness, and oxygen level can drift from the programmed value, and a defect investigation should check which was used.

Return the full parameter set with its material/machine qualification status, and flag any parameter that is nominal rather than verified.