jasonanewcoder/abaqus_skills/general

Abaqus General Skills

Overview

This skill module provides core general skills for Abaqus Python scripting development, including geometric modeling, material definition, step setup, boundary conditions and loads, mesh generation, and job submission. These skills form the foundation for any type of Abaqus analysis.

Skills List

0. Agent Execution Loop (read first when RUNNING analyses)

For tasks that run a simulation (not just write code), follow the closed loop in abaqus_agent_playbook.md: clarify → generate → run headless → diagnose → iterate → verify → report.

• `reference/headless_execution.md` — abaqus cae noGUI=, abaqus job=, .sta/.msg/.dat parsing, exit codes
• `reference/error_diagnosis.md` — symptom → cause → fix decision tables (convergence, zero pivot, hourglass, NaN...)
• `reference/postprocess_odb.md` — read .odb, extract S/U/RF, compute Mises, energy diagnostics
• `reference/verification.md` — analytical benchmarks, mesh convergence, energy balance
• `reference/interaction_contact.md` — general contact, contact pairs, tie/coupling/MPC

1. Geometric Modeling (skill_modeling)

Create geometric parts in Abaqus models, including sketch-based extrusion, revolution, sweep, and other modeling methods.

Core Functions:

• Basic geometry creation (blocks, cylinders, tubes, spheres, etc.)
• Sketch drawing (points, lines, circles, arcs, polygons)
• Geometry operations (cutting, filleting, chamfering, shelling, mirroring, patterning)

Code Snippet:

# Create 3D solid part
model = mdb.Model(name='Model-1')
part = model.Part(name='Part-1', dimensionality=THREE_D, type=DEFORMABLE_BODY)
# Create sketch and extrude
sketch = model.ConstrainedSketch(name='__profile__', sheetSize=200.0)
sketch.rectangle(point1=(0.0, 0.0), point2=(length, width))
part.BaseSolidExtrude(sketch=sketch, depth=height)

Detailed Documentation: `reference/modeling.md`

2. Material Definition (skill_material)

Define material properties and create section properties, assigning materials to geometric parts.

Core Functions:

• Linear elastic material definition
• Plastic material (ideal elastic-plastic, bilinear hardening)
• Hyperelastic material (Mooney-Rivlin)
• Orthotropic material
• Shell/Beam sections
• Thermal properties

Code Snippet:

# Create isotropic linear elastic material
material = model.Material(name='Steel')
material.Elastic(table=((210000.0, 0.3),))  # E, nu
material.Density(table=((7.85e-09,),))       # tonne/mm³
# Create section and assign
section = model.HomogeneousSolidSection(name='Section-1', material='Steel')
part.SectionAssignment(region=(part.cells,), sectionName='Section-1')

Detailed Documentation: `reference/material.md`

3. Step Setup (skill_step)

Define step types, output requests, solver controls, etc.

Core Functions:

• Static steps (linear/nonlinear)
• Buckling steps
• Modal steps
• Transient dynamic steps
• Heat transfer steps
• Field output/History output requests

Code Snippet:

# Create static step
model.StaticStep(
    name='Static-Step',
    previous='Initial',
    initialInc=0.1,
    maxInc=0.5,
    nlgeom=ON
)
# Set field output
model.FieldOutputRequest(
    name='F-Output-1',
    createStepName='Static-Step',
    variables=('S', 'E', 'U', 'RF')
)

Detailed Documentation: `reference/step.md`

4. Boundary Conditions and Loads (skill_bc_load)

Define boundary conditions (displacement constraints) and external loads (forces, pressures, temperatures, etc.).

Core Functions:

• Fixed constraints, symmetry constraints, specified displacements
• Concentrated forces, distributed pressures
• Gravity/Acceleration loads
• Temperature loads
• Bolt pretension
• Amplitude curves

Code Snippet:

# Create fixed constraint
fixed_faces = instance.faces.findAt(((0.0, 25.0, 10.0),))
region = assembly.Set(name='Fixed-End', faces=fixed_faces)
model.DisplacementBC(
    name='BC-Fixed',
    createStepName='Initial',
    region=region,
    u1=0.0, u2=0.0, u3=0.0
)
# Create pressure load
model.Pressure(
    name='Load-Pressure',
    createStepName='Step-1',
    region=region,
    magnitude=10.0
)

Detailed Documentation: `reference/bc_load.md`

5. Mesh Generation (skill_mesh)

Define mesh control parameters, set element types, and generate finite element mesh.

Core Functions:

• Automatic/Structured/Sweep/Free mesh
• Local mesh refinement
• Element type selection (solid/shell/beam)
• Mesh quality check

Code Snippet:

# Set mesh control (hexahedral)
part.setMeshControls(
    regions=(part.cells,),
    elemShape=HEX,
    technique=STRUCTURED
)
# Set seeds and element type
part.seedPart(size=5.0)
elem_type = mesh.ElemType(elemCode=C3D8R, elemLibrary=STANDARD)
part.setElementType(regions=(part.cells,), elemTypes=(elem_type,))
# Generate mesh
part.generateMesh()

Detailed Documentation: `reference/mesh.md`

6. Job Submission (skill_job)

Create analysis jobs, set solver parameters, submit calculations, and monitor job status.

Core Functions:

• Basic job submission
• Parallel computation setup
• Memory optimization
• Restart analysis
• Submodel analysis
• Job monitoring and diagnostics

Code Snippet:

# Create and submit job
job = mdb.Job(
    name='Analysis-Job',
    model='Model-1',
    numCpus=4,
    numDomains=4
)
job.submit()
job.waitForCompletion()
# Check status
if job.status == COMPLETED:
    print("Analysis completed successfully!")

Detailed Documentation: `reference/job.md`

Quick Reference

Common Unit System (N-mm-MPa)

Common Material Parameters

Common Element Types

Usage Suggestions

1. Modular Construction: Use skill modules from this library to build complete scripts
2. Parametric Design: Set geometric dimensions and material parameters as variables
3. Verify Before Running: Generate input file first to check for errors before submitting
4. Result Check: After calculation, check msg and dat files to confirm no errors

Related Skills

• Static Analysis
• Fatigue Analysis
• XFEM Crack Analysis
• Thermal Stress Analysis
• Composite Material Analysis