version: "1.0.1" name: cstatus description: Show current Correctless workflow state, available commands, and suggested next steps. Run anytime to see where you are. allowed-tools: Bash, Read, Grep, Glob disallowed-tools: Edit, Write, MultiEdit, NotebookEdit, CreateFile interaction_mode: autonomous

/cstatus — Workflow Status and Next Steps

Shared constraints apply. Before executing, read _shared/constraints.md from the parent of this skill's base directory. All constraints there apply to this skill.

You are the status agent. Show the human where they are in the workflow and what to do next. Be concise and actionable.

Intensity Configuration

Effective Intensity

Determine the effective intensity using the computation in the shared constraints (_shared/constraints.md).

Behavior

Intensity-Aware Status Display

• At standard intensity: show phase, next step, and time in phase.
• At high intensity: additionally show stale workflow warning when a phase exceeds its expected duration.
• At critical intensity: additionally show token budget warning to alert when context usage is approaching limits.

1. Check Setup

First, verify Correctless is set up in this project:

• Does .correctless/config/workflow-config.json exist?
• Does .correctless/hooks/workflow-gate.sh exist?
• Does .correctless/ARCHITECTURE.md exist and not contain {PROJECT_NAME} or {PLACEHOLDER} template markers? (Note: a minimal .correctless/ARCHITECTURE.md with "This project is in early development" is valid — it means /csetup ran on a greenfield project and intentionally deferred architecture docs.)

If not set up: "Correctless isn't configured in this project yet. Run /csetup to get started."

2. Check Current Workflow State

Run:

.correctless/hooks/workflow-advance.sh status 2>/dev/null

If no active workflow, also run:

.correctless/hooks/workflow-advance.sh status-all 2>/dev/null

3. Present Status

If no active workflow on current branch:

"No active workflow on {branch}. You can:

• Start a new feature: git checkout -b feature/my-feature then /cspec
• Check other branches: {show status-all output if there are active workflows elsewhere}"

When displaying the current phase, calculate and show the time spent in this phase. Read phase_entered_at from the state file, compute the duration as now - phase_entered_at, and display in human-readable format:

• Under 60 minutes: '{N} minutes' (e.g., '12 minutes')
• 1-24 hours: '{N} hours' (e.g., '2 hours')
• Over 24 hours: '{N} days' (e.g., '1 day')

Format: 'Phase: {phase} ({duration})'

Proactive warnings at thresholds:

• After more than 1 hour in a phase: 'This phase has been active for {duration}. If you are stuck, try re-running the skill for this phase.'
• After more than 24 hours: 'This workflow has been in {phase} for {duration}. The workflow may be stalled — re-run the skill or use workflow-advance.sh override if needed.'

If workflow is active, show a pipeline diagram with the current phase marked. Use ▶ to indicate the active phase. At standard intensity:

  spec → review → [ tdd ] → verify → docs → merge
                     │
               ┌─────┴─────┐
              RED → GREEN → QA
                     │       │
               test audit    │
                     └─ fix ◄┘

At high+ intensity, include the extra steps:

  spec → model → review → [ tdd ] → verify → arch → docs → audit → merge
                             │
                       ┌─────┴─────┐
                      RED → GREEN → QA
                             │       │
                       test audit    │
                             └─ fix ◄┘

Mark the current phase with ▶ and show it in the diagram. For TDD sub-phases (tdd-tests, tdd-impl, tdd-qa), mark the specific position inside the TDD box.

Then show phase-specific guidance:

3a. Harness fingerprint advisory line

After the phase-specific guidance in section 3 and before showing available commands in section 4, emit a single advisory line about the harness fingerprint state. This sits between the workflow state section and the intensity calibration section (per harness-fingerprint spec INV-015).

Read .correctless/meta/harness-fingerprint.json if it exists. Compute the short form:

• If the file is missing: Harness: model=unknown version=? fingerprint=00000000 status=new
• If present and valid JSON: Harness: model={X} version={Y} fingerprint={hash[:8]} status=ok
• If status=version_bumped was reported by the most recent harness-fingerprint.sh check (read from .correctless/artifacts/harness-notified-*.flag presence in current session): Harness: model={X} version={Y} fingerprint={hash[:8]} status=version-bumped

The format is fixed: Harness: model=\S+ version=\d+ fingerprint=[0-9a-f]{8} status=(ok|new|version-bumped). The fingerprint short form is the first 8 hex characters of sha256(fingerprint) for compact display only — the literal fingerprint stored in the meta file is {model_name}|{HARNESS_VERSION} without hashing (INV-001).

This line is advisory — never block, never error. If the file is malformed or unreadable, emit Harness: model=unknown version=? fingerprint=00000000 status=ok and continue silently.

4. Show Available Commands

Based on the current state:

Available commands:
  /cspec          Start a new feature spec
  /creview        Skeptical spec review
  /ctdd           Enforced TDD workflow
  /cverify        Post-implementation verification
  /cdocs          Update documentation
  /cstatus        This command — show status and next steps
  /csummary       Feature summary — what the workflow caught
  /cmetrics       Project-wide metrics dashboard
  /crefactor      Structured refactoring with behavioral equivalence
  /cpr-review     Multi-lens PR review
  /ccontribute    Contribute to an open source project
  /cmaintain      Maintainer review for incoming contributions
  /cdebug         Structured bug investigation
  /csetup         Re-run setup / validate configuration
  /chelp          Quick help — workflow pipeline and commands
  /cwtf           Workflow accountability — did agents do their job?
  /cquick         Lightweight TDD — quick-start without full spec
  /crelease       Versioning and changelog management
  /cexplain       Guided codebase exploration
  /cauto          Semi-auto pipeline — orchestrates ctdd through PR
  /cmodelupgrade  Harness regression report (after model upgrade or version_bumped advisory)
  /carchitect     Architecture definition — reverse-engineer or greenfield
  /cdashboard     HTML project dashboard — metrics + artifact browser
  /ctriage        Bulk triage deferred findings backlog
  /cprune         Documentation and artifact pruning
  /cpostmortem    Post-merge bug analysis
  /cdevadv        Devil's advocate — challenge assumptions
 
Intensity-gated (shown at high+ unless noted):
  /creview-spec   Adversarial 6-agent spec review                    [high+]
  /cmodel         Formal Alloy modeling                              [critical+]
  /caudit         Olympics audit (QA/Hacker/Performance/UX)           [high+]
  /cupdate-arch   Update .correctless/ARCHITECTURE.md                [high+]
  /credteam       Live red team assessment                           [critical+]
 
State management:
  .correctless/hooks/workflow-advance.sh status      Current phase
  .correctless/hooks/workflow-advance.sh status-all   All active workflows
  .correctless/hooks/workflow-advance.sh diagnose "file"   Why a file is blocked
  .correctless/hooks/workflow-advance.sh override "reason"  Temporarily bypass gate

Read .correctless/config/workflow-config.json. If workflow.intensity is below high, omit the "Intensity-gated" section from the output — those commands are not available at standard intensity.

5. Install Freshness

Check install freshness and display as a single status line:

source .correctless/scripts/lib.sh
output="$(check_install_freshness "$(pwd)/.correctless" 2>/dev/null)"

Parse the output and display one line:

• If all lines are ok:*: "Install: current"
• If any line is source_ahead:*: "Install: STALE — {N} source files changed since last setup (run setup)" where N is the count of source_ahead lines.
• If any line is modified:* or missing:* (without source_ahead): "Install: STALE ({N} files differ — run setup)" where N is the count of modified + missing lines.
• If output is no_manifest: "Install: unknown (no manifest — run setup)"

This is a single line in the status output, not a separate section.

6. Detect Problems

After showing phase and commands, proactively check for issues:

Stale workflow: If >24 hours in a phase, this is already handled by the time-in-phase display in section 3 above — do not repeat the warning here. Only check for stale workflows if section 3 did not already display a >24h warning (e.g., if phase_entered_at was missing or unparsable).

Empty docs: Check if .correctless/ARCHITECTURE.md contains {PROJECT_NAME} or {PLACEHOLDER} markers, or if .correctless/AGENT_CONTEXT.md contains {PROJECT_NAME} or {PLACEHOLDERS}. If either is still the template: ".correctless/ARCHITECTURE.md / .correctless/AGENT_CONTEXT.md is still the default template. Run /csetup to populate it from your codebase — this significantly improves spec and review quality."

Override usage: Read override_count from the state file. If ≥2: "You've used {N} overrides on this workflow. If the gate keeps blocking legitimate edits, the workflow config or file patterns may need adjustment. Run workflow-advance.sh diagnose 'yourfile.ts' to understand why."

Measurement-overdue check (path-scoped-rules-pat001 dogfood, INV-016 / MG-003): If .correctless/meta/pat001-measurement-due.json exists, inspect it:

1. Read due_at_pr_count (an integer, typically 3) and created_at_commit (a commit SHA or null).
2. If created_at_commit is null, the feature has merged but the measurement baseline commit was never recorded — emit a one-line advisory: "pat001-measurement-due.json exists but created_at_commit is null; /cdocs or /cverify should fill it at merge time." Then stop this check.
3. Otherwise, count hook-touching merged PRs since created_at_commit. A hook-touching PR is any PR whose merge commit modifies a file under hooks/*.sh. Use: git log --merges --name-only "$created_at_commit"..HEAD -- 'hooks/*.sh' | grep -c '^hooks/' || true — adapt if the local git log shape is different.
4. If the hook-touching PR count is >= due_at_pr_count AND .correctless/verification/path-scoped-rules-pat001-measurement.md does NOT exist, emit a warning banner (prominently, above the standard status block):

> WARNING — Measurement overdue: path-scoped-rules-pat001 — run measurement gate per MG-003 or roll back per PRH-002.

Include a one-line pointer: "See .correctless/specs/path-scoped-rules-pat001.md MG-003 for the procedure, and PRH-002 for the rollback steps."

1. If the measurement report already exists at .correctless/verification/path-scoped-rules-pat001-measurement.md, suppress the warning — the gate has been evaluated.
2. If the meta file is missing, this check is a no-op. Do not create it.

This check is dormant by design: it fires only when the post-merge measurement window has elapsed and the human has not yet run the gate. It is the only merge-time-enforceable signal for MG-003 (the measurement gate is evaluated post-merge via git archaeology, not at PR time).

No active workflow: "No active workflow on this branch. You can edit freely — the gate only blocks during active workflows. To start a structured workflow: git checkout -b feature/my-feature then /cspec."

6a. Incomplete Pipeline Detection (R-009)

Check for a pipeline manifest at .correctless/artifacts/pipeline-manifest-{branch_slug}.json (derive branch_slug via workflow-advance.sh status output or scripts/lib.sh). If the manifest exists and status is not "complete", report:

Incomplete pipeline detected. Last completed step: {last_completed}. Missing steps: {list}. Expected end phase: {expected_end_phase}, current phase: {current_phase}. Run /cauto to resume.

If the manifest does not exist or status is "complete", produce no output for this section (dormant — PAT-019).

The workflow state is authoritative — the manifest report is a diagnostic signal, not an override of workflow state.

6a-bis. Incomplete /cchores Run Detection (INV-016 / ABS-043)

/cchores runs on a chore/issue-N-* branch that the user is typically not on by the time they next open /cstatus (a chore launched overnight leaves them on main or another feature branch in the morning). Deriving the manifest path from the CURRENT branch would therefore miss every truncated chore run. So scan branch-independently, exactly like the retained-branch scan below: glob .correctless/artifacts/chore-run-*.json and report any manifest whose status is not "complete". Name the affected branch from inside the manifest (its branch_slug / branch field), not from the current branch.

For each globbed manifest with status != "complete":

• `in_progress` — a truncated run. Report:

> Incomplete /cchores run detected on {branch from manifest}. Selected issue: #{selected_issue}. Status: in_progress (truncated run). Re-run /cchores to resume.

• `aborted` — Report:

> Aborted /cchores run on {branch from manifest}. Selected issue: #{selected_issue}. {abort_reason}. Re-run /cchores to resume.

• `noop` — a clean run that found no suitable issue. This is NOT a truncation;

do not tell the user to "re-run to resume". Report instead:

> /cchores ran and found no suitable issues — nothing to resume. (Last run on {branch from manifest} selected no candidate.)

Truncation/state is determined by status content equality, not mtime (EA-008). If no chore-run-*.json manifest exists, or every manifest has status "complete", produce no output for this section (dormant — PAT-019).

Retained abort branches: scan .correctless/artifacts/chore-abort-*.md and .correctless/artifacts/chore-report-*.md for any /cchores abort that retained a local-only chore branch (a chore branch with commits that was not pushed — unreachable from GitHub). For each retained branch, surface it so it is not lost:

Retained chore branch: {branch} (issue #{N}) — retained locally on abort, not pushed. Resume or delete it manually.

If no abort artifact references a retained branch, produce no output for this section (dormant — PAT-019).

6a-ter. /cchores attempted-issues store (INV-019 consumer)

INV-019 names /cstatus as a consumer of the durable cross-run loop-prevention store .correctless/meta/cchores-attempted.json (the same store /cchores's candidate selector reads via --attempted-store). Surfacing it here gives the user visibility into which issues /cchores has already attempted or suppressed, so a repeatedly-skipped issue is not invisible.

Read .correctless/meta/cchores-attempted.json if it exists. It holds an attempts array of {issue, branch_slug, outcome} records. Summarize:

/cchores attempted issues: {N} recorded. Suppressed/attempted: #{issue} ({outcome}), … — these are excluded from future autonomous selection. To re-allow one, edit the store.

If the file does not exist, is empty, or its attempts array is empty, produce no output for this section (dormant per PAT-019 — pre-upgrade and never-run projects see nothing).

6b. Deferred Findings Backlog

Read .correctless/meta/deferred-findings.json if it exists. Show the following:

• Total open findings count and severity breakdown (MEDIUM/LOW/ADVISORY counts)
• When open findings exceed 20: "Consider running /ctriage to review the deferred findings backlog."

When the file does not exist or has zero open findings, omit this section entirely (dormant per PAT-019 — no "0 findings" noise).

Drift detection: If review artifacts (.correctless/artifacts/review-spec-findings-*.md or .correctless/artifacts/review-findings-*.md or .correctless/artifacts/reviews/review-findings-*.md) contain "pending" findings not present in the backlog, suggest: "Review artifacts contain pending findings not in the backlog. Run bash scripts/sync-deferred-backlog.sh to re-sync."

6c. Cross-Feature Intelligence Health

Check the state of the cross-feature intelligence brief and its data sources. Three states:

1. No data: When .correctless/meta/cross-feature-intel.json does not exist AND no data sources have content (no deferred findings, no devadv reports, no overrides, no lens recommendations, no debug investigations, no workflow effectiveness data), display: "No cross-feature intelligence available yet — data accumulates as features complete review, audit, or debug phases."

1. Stale: When the brief exists but is older than 7 days (based on file mtime), display brief age, entry count per section, and remediation: "Cross-feature intelligence brief is {N} days old. Will refresh on next /cspec run, or run: bash .correctless/scripts/cross-feature-intel.sh"

1. Current: When the brief exists and is less than 7 days old, display brief age and entry count per section.

Threshold proximity reporting: When the brief exists (states 2 or 3), report threshold proximity for entries — the occurrence-level breakdown showing how many entries are at each count below the threshold. For example: "5 entries at 2/3 occurrences, 3 entries at 1/3, 2 entries above threshold." This provides diagnostic visibility for users investigating why intelligence is not surfacing in reviews. Read occurrence counts via jq '[.sections | to_entries[] | .value[] | .occurrences // 0]' .correctless/meta/cross-feature-intel.json.

Dormant when the script itself (`scripts/cross-feature-intel.sh` or `.correctless/scripts/cross-feature-intel.sh`) does not exist — pre-upgrade projects should see no intelligence health output (PAT-019). When the script does not exist, omit this section entirely.

6d. Stranded SFG lift sentinel (RS-024 / AP-037)

Detect a committed-but-not-restored SFG lift sentinel. When .correctless/.sfg-lift-active exists in the working tree, display a WARNING: "Stranded SFG lift sentinel detected (.correctless/.sfg-lift-active). An AP-037 lift-and-restore is mid-flight — a lift commit removed a deliverable from sensitive-file-guard.sh DEFAULTS but the restore commit has not landed. Before pushing: restore agents/fix-diff-reviewer.md to the DEFAULTS list, run bash sync.sh, then git rm -f .correctless/.sfg-lift-active. The final-state backstop is bash scripts/check-no-pending-sfg-lift.sh (source) / bash .correctless/scripts/check-no-pending-sfg-lift.sh (installed). See .claude/rules/sfg-deliverable.md."

When the sentinel is absent, omit this section entirely.

6e. Cross-model review discoverability advisory (RS-010 / INV-023)

If codex is on PATH (command -v codex) AND .workflow.external_models in workflow-config.json is empty or absent, emit a one-time advisory:

codex detected — run /csetup to enable cross-model spec review (codex reviews specs alongside Claude in /creview-spec).

This keeps the feature discoverable rather than invisibly dormant. If codex is not on PATH, or external_models.codex is already configured, omit this section entirely.

6f. Un-adjudicated cross-model review runs (INV-008 / RS-027 / MA-005)

INV-008/RS-027 promise the pending surface (completed codex runs whose findings have not yet been adjudicated) in BOTH /creview-spec AND /cstatus. Run the producer's pending subcommand and report any un-adjudicated runs so a user who deferred adjudication and never reopened /creview-spec still gets a signal (PMB-008 lost-findings class):

bash .correctless/scripts/external-review-run.sh pending

(Use scripts/external-review-run.sh from the source tree.) When the output is empty or "(no external-review history)", this section is dormant — emit nothing. When it lists one or more runs, surface:

Un-adjudicated cross-model review run(s): {run_id} — {N} finding(s) awaiting disposition.
Reopen /creview-spec to adjudicate, or run: external-review-run.sh set-disposition <run_id> <finding_id> <accepted|rejected|modified|deferred|duplicate>.

If the producer script does not exist at either path, this section is dormant (PAT-019) — no error, no output.

7. Health Check (if requested)

If the human asks "is everything set up correctly?" or similar, validate:

• Hooks registered in .claude/settings.json
• Config file valid JSON with required fields
• Hook scripts exist and are executable at .correctless/hooks/
• .correctless/ARCHITECTURE.md has content (not template)
• .correctless/AGENT_CONTEXT.md has content (not template)

Report any issues with fix instructions.

Pruning Recommended Signal (INV-013)

Run a lightweight staleness check using scripts/prune-scan.sh (or .correctless/scripts/prune-scan.sh). If the scanner script does not exist (file does not exist at either path), this section is dormant per PAT-019 — no error, no warning, no output.

When the scanner is available, check two categories:

1. Orphaned artifacts: bash scripts/prune-scan.sh --category artifacts --base . | jq '.candidates | length' — read .candidates from the wrapped-object schema (BND-001)
2. Architecture staleness: bash scripts/prune-scan.sh --category architecture --base . | jq 'length' — bare array, read length directly

Surface the signal when either: (a) more than 10 orphaned artifact files exist, or (b) more than 3 architecture entries have all-dead file references.

Signal text: "Pruning recommended: {N} orphaned artifacts, {M} stale architecture entries. Run /cprune to clean up."

Autonomous Defaults

• AD-001: Display scope — show full pipeline status with next steps (default). No human input required; this skill runs to completion autonomously.

If Something Goes Wrong

• /cstatus is read-only — it reads workflow state and project files but modifies nothing. Re-run anytime safely.
• If status looks wrong, check that .correctless/config/workflow-config.json exists and the hook scripts are installed at .correctless/hooks/.

Constraints

• Keep it short. Status should be a quick glance, not a wall of text.
• Always suggest the next action. Don't just show state — tell them what to do.
• Don't modify anything. This is read-only.