version: "1.0.1" name: simulating-simulink-models description: Runs Simulink models programmatically for data exploration, parameter sweeps, and custom analysis using sim() with SimulationInput/SimulationOutput. Use when calling sim(), parsim, setExternalInput, setModelParameter, setVariable, or accessing logsout — any task producing simulation results for analysis (not pass/fail tests). license: https://www.mathworks.com/content/dam/mathworks/license/pmrl/license.md metadata: author: MathWorks version: "1.1"

Simulating Simulink Models with the sim Command

Use this skill to generate simulation results for analysis. For persistent, reusable pass/fail behavioral testing (especially of individual subsystems), use testing-simulink-models instead.

When to Use

• Running a Simulink model from a MATLAB script
• Configuring simulation parameters (StopTime, solver, etc.) programmatically
• Passing input signals to root-level Inport blocks
• Accessing logged signal data after simulation
• Running parameter sweeps or batch simulations

When NOT to Use

• Writing declarative Gherkin-based tests → use testing-simulink-models
• Testing an individual subsystem or component → use testing-simulink-models (requires Simulink Test; auto-creates a harness, compiles only the subsystem — much faster than sim() which always compiles the entire model)

Minimal working pattern

Always simulate using Simulink.SimulationInput and Simulink.SimulationOutput:

in = Simulink.SimulationInput('MyModel');
in = in.setModelParameter('StopTime', '10');
out = sim(in);

Setting parameters

Use SimulationInput methods to configure the simulation:

% Model-level parameters (StopTime, SolverType, SimulationMode, etc.)
in = in.setModelParameter('StopTime', '10', 'SolverType', 'Fixed-step');
 
% Block parameters — resolve path from blk_X ID (never type block names manually)
blkPath = Simulink.ID.getFullName('MyModel:5');
in = in.setBlockParameter(blkPath, 'Gain', '5');
 
% MATLAB workspace variables used by the model
in = in.setVariable('Kp', 1.2);

Input signals

Pass input signals through Inport blocks using a Simulink.SimulationData.Dataset. Elements are matched to Inport blocks by index position — the first element maps to the Inport with port number 1, the second to port number 2, and so on.

dt = 0.01;
N = 1000;
t = dt*(0:N)';
u = sin(2*pi*t);
 
ts = timeseries(u, t);
 
ds = Simulink.SimulationData.Dataset;
ds{1} = ts;
 
in = in.setExternalInput(ds);
out = sim(in);

You can also use timetable as an input format:

secs = seconds(t);
tt = timetable(secs, u);
 
ds = Simulink.SimulationData.Dataset;
ds{1} = tt;
 
in = in.setExternalInput(ds);

Discovering logged data

First, discover what kinds of logged data the model produces using who, then inspect signal names within logsout:

in = Simulink.SimulationInput('MyModel');
out = sim(in);
 
% See what logging properties exist (logsout, yout, tout, etc.)
who(out)
 
% List individual signal names within logsout
disp(out.logsout.getElementNames);

Accessing logged data

Logged signals are available through out.logsout. Access them directly by name:

% Plot a logged signal
plot(out.logsout.get('signalName').Values)
 
% Get time and data separately
sig = out.logsout.get('signalName').Values;
plot(sig.Time, sig.Data)

Multiple simulations

When running many simulations, create an array of Simulink.SimulationInput objects:

in = repmat(Simulink.SimulationInput('MyModel'),N,1);
for k = 1:N
    in(k) = Simulink.SimulationInput('MyModel');
    in(k) = in(k).setVariable('gain', gains(k));
end
out = sim(in);

To enable fast restart for iterative sweeps (compiles the model only once):

out = sim(in, 'UseFastRestart', 'on');

Parallel simulation (parsim)

To run multiple simulations in parallel, use parsim instead of looping over sim:

for k = 1:N
    in(k) = Simulink.SimulationInput('MyModel');
    in(k) = in(k).setVariable('gain', gains(k));
end
out = parsim(in);

parsim also supports 'UseFastRestart','on' for faster batch runs.

Guardrails

• Never use set_param, load_system, or open_system to drive simulation — SimulationInput replaces all of these.
• Never wrap SimulationOutput access in try-catch or isfield — sim either returns a valid object or throws. SimulationOutput has no isfield method.
• Never create unnecessary intermediate variables for logged data — access directly via out.logsout.get('name').Values.
• Always use in/out as variable names for SimulationInput/SimulationOutput.
• Always use setExternalInput with a Dataset — don't pass comma-separated lists of variables.

Copyright 2026 The MathWorks, Inc.