oaslananka/kicad-mcp-pro/drc-check

DRC Check Skill

Use this skill when an AI agent is asked to run, interpret, triage, or revalidate KiCad ERC/DRC results through KiCad MCP Pro.

This skill is specific to oaslananka/kicad-mcp-pro and should be kept synchronized with docs/tools-reference.generated.md.

When to use

Use this skill for:

• Schematic ERC review
• PCB DRC review
• DRC rule inspection and custom rule checks
• Unconnected net triage
• Courtyard and silk-to-pad violation triage
• Waiver/exclusion review
• Revalidation after an edit

Do not use this skill to hide, auto-waive, or normalize violations without explicit engineering rationale.

Required context

Collect:

• Active project path and KiCad version from kicad_get_project_info
• Board and schematic files
• Target gate: ERC, DRC, project gate, release gate, or revalidation loop
• Manufacturer or design-rule constraints, if relevant
• Existing waivers/exclusions, if any

Primary MCP tools

Setup and discovery

• kicad_get_project_info
• kicad_get_version
• kicad_help
• kicad_get_tools_in_category

ERC and schematic checks

• run_erc
• erc_list_rules
• schematic_quality_gate
• schematic_connectivity_gate
• schematic_design_rule_check
• sch_check_power_flags
• sch_get_net_names
• sch_get_symbols

DRC and board checks

• run_drc
• drc_list_rules
• drc_check_rule_conflicts
• drc_list_exclusions
• drc_validate_exclusions
• get_unconnected_nets
• get_courtyard_violations
• get_silk_to_pad_violations
• pcb_quality_gate
• pcb_transfer_quality_gate
• pcb_stackup_consistency_gate

Controlled rule/exclusion operations

Use these only when explicitly requested and when the rationale is documented.

• drc_add_exclusion
• drc_remove_exclusion
• drc_rule_create
• drc_rule_delete
• drc_rule_enable
• drc_export_rules
• erc_set_rule_severity
• erc_reset_rules

Project-level validation

• project_quality_gate
• project_quality_gate_report
• project_full_validation_loop
• project_revalidate_after_edit
• project_gate_trend

Workflow

1. Confirm active project and KiCad capability with kicad_get_project_info and kicad_get_version.
2. Run ERC with run_erc when schematic validation is in scope.
3. Run DRC with run_drc when PCB validation is in scope.
4. Run targeted issue extractors: get_unconnected_nets, get_courtyard_violations, and get_silk_to_pad_violations.
5. Inspect rule configuration with drc_list_rules, erc_list_rules, and drc_check_rule_conflicts when violations are unclear.
6. Check exclusions with drc_list_exclusions and drc_validate_exclusions.
7. Run the relevant quality gates.
8. Group findings by severity, rule, object/reference, location, and likely fix.
9. If edits are performed by another workflow, re-run the targeted gates and compare before/after results.
10. Report remaining violations, accepted waivers, and unverified assumptions separately.

Waiver policy

A DRC/ERC issue may be marked as waived only when the response documents:

• Rule name or violation ID
• Location/object/reference
• Expected requirement
• Actual deviation
• Engineering rationale
• Human approval requirement

Do not add DRC exclusions automatically just to make a gate pass.

Quality checks

A complete DRC/ERC report must include:

• Tool versions or project context
• ERC result summary
• DRC result summary
• Issue counts by severity
• Critical blockers
• Waivers/exclusions status
• Recommended fixes
• Revalidation result after any changes

Failure modes

Stop and report clearly when:

• KiCad CLI is unavailable for file-backed checks
• Project paths are ambiguous
• DRC/ERC output cannot be produced
• Rule files are missing or conflicting
• Exclusions are stale or cannot be validated
• The user asks to suppress violations without an engineering reason

Output format

Return:

• Project context
• ERC summary
• DRC summary
• Rule/exclusion status
• Findings by severity
• Recommended fixes
• Revalidation evidence
• Human-review notes