version: "1.0.1" name: comet-tweak description: "Comet preset — handle a lightweight or medium change that fits one OpenSpec change."

Comet Preset Path: Tweak

Before starting or recovering, read and follow comet-classic/reference/classic-layout.md. Every OpenSpec CLI call in this file must use the adapter, and every file path must use the <classic-*> logical roots bound by that protocol.

Tweak is a preset workflow of Comet's five-phase capabilities, not an independent parallel process. It chains OpenSpec's core flow, reusing open, build, verify, archive capabilities, only skipping Superpowers brainstorming and full plan.

Applicable for OpenSpec-chained lightweight changes, such as configuration adjustments, documentation or prompt optimization, and spec-driven (including delta spec) medium changes that do not need the full /comet-classic deep design workflow. Delta spec is a first-class normal artifact in tweak; needing delta spec alone does not constitute an upgrade reason.

Applicable conditions (all must be met):

1. Can fit a single OpenSpec change
2. Does not need a Superpowers Design Doc and full plan to clarify the approach
3. Does not involve cross-module or cross-layer architecture coordination
4. Task scope is estimable (file count and task count are hints only, not hard upgrade conditions; see Upgrade Assessment below)

Not applicable: If the change process hits a qualitative-change signal (see "Upgrade Assessment" section), the user decides whether to upgrade to the full /comet-classic workflow.

Process (preset workflow, 4 phases)

0. Output Language Constraint

Streamlined OpenSpec artifacts must use the configured Comet artifact language. Before .comet.yaml exists, read classic.language from project .comet/config.yaml, then fall back to global ~/.comet/config.yaml; after initialization, use comet state get <name> language.

Execution chain: open → OpenSpec apply → verify → archive. Tweak provides default decisions for each phase: streamlined open, direct build through OpenSpec apply, scale- and delta-spec-driven verification weight, and final archive confirmation after verification passes.

Before starting, use comet-classic/reference/scripts.md to run the public Comet CLI command. When resuming from any entry point, first use comet-classic/reference/context-recovery.md to check phase/workflow.

When resuming an existing tweak change, the first state operation must be comet state select <change-name>. For a new change, run the command immediately after .comet.yaml initialization and before source writes.

After entering the tweak workspace and reading phase, run comet task <project-root> --task "<original user request>" --phase "<phase>" --session "<stable task id>" --json. Inject only returned text; the Context Manifest (manifest / <context_manifest>) contains summaries, application reasons, and stable IDs. Add --expand-context "<id>" for full content, sources, or verification, and select again with the same --session when path, operation, or phase changes. Use comet memory remember ... --scope global|project for an explicit long-term request and comet memory observe only for an implicit but reusable stable habit; never save task summaries, progress, command output, or test results. After actually using an item, take applications[].applicationId from JSON (or application_id from Hook context) and report the known result with comet task <project-root> --task "<original user request>" --application "<application-id>" --outcome used-successfully|ignored|overridden|corrected|contributed-to-failure --json. At task end still run comet task with --complete --workflow <workflow> --change <change-id>. Without Hooks this Skill uses the same interface and comet memory context is only a compatibility entry; plugin failure never blocks the change.

1. Quick Open (preset open)

Reuse Comet open capability to create change, but use tweak defaults: do not execute openspec-explore long exploration, directly enter streamlined change creation.

Immediately execute: Use the Skill tool to load the openspec-new-change skill. Skipping this step is prohibited.

<!-- external-openspec-skill-override --> External OpenSpec Skill override: Do not execute its direct official CLI, fixed-cwd, or fixed physical OpenSpec path instructions. Route every OpenSpec command through comet classic openspec -- <args...> and use the <classic-*> logical roots bound for this run for every change and artifact path.

After the skill loads, follow its guidance to create streamlined artifacts:

• proposal.md — change motivation + goals + scope
• design.md — brief implementation description (no solution comparison needed)
• tasks.md — task list (keep to a reasonable size; count itself does not trigger upgrade, see "Upgrade Assessment")
• delta spec (optional) — if the change affects existing spec acceptance scenarios, create it as a normal artifact (only ## MODIFIED Requirements or ## ADDED Requirements). Delta spec is the core artifact of OpenSpec brownfield changes; needing delta spec alone does not constitute an upgrade reason

Initialize Comet state file:

comet state init <name> tweak
comet state select <name>

Verify initialized state:

comet state check <name> open

If the select / check output is BLOCKED because bound_branch does not match the current branch, immediately pause under comet-classic/reference/decision-point.md and let the user choose one option: switch back to the bound branch and rerun entry verification, or run comet state rebind <change-name> after the user explicitly confirms the current branch should take over this change, then rerun entry verification. Do not switch branches or rebind on your own.

Entry workspace isolation is a user decision point; do not use current as the default isolation mode. Pause under comet-classic/reference/decision-point.md and let the user choose one option:

• A. Work directly on the current branch: run comet state set <name> isolation current to truthfully bind the current branch
• B. Create a branch: create and switch to tweak/YYYYMMDD/<change-name>, then run comet state set <name> isolation branch
• C. Create a worktree: first use the Skill tool to load Superpowers using-git-worktrees; let that skill create the isolated workspace, then run comet state set <name> isolation worktree inside the worktree

After B/C, rerun this in the actual execution branch or worktree:

comet state select <name>

Run phase guard to transition open → build:

comet guard <change-name> open --apply

2. OpenSpec Apply Build (tweak-only preset build)

Use tweak defaults: build_mode: direct. isolation must keep the entry workspace isolation the user confirmed in Step 1; do not change it back to current on your own. Skip Superpowers brainstorming and writing-plans, and let OpenSpec's apply action execute the current change's tasks.

<IMPORTANT> This apply path belongs only to tweak. Full /comet-classic or workflow: full must not use tweak's openspec-apply-change build path; full must still generate a Design Doc through /comet-design, then let /comet-build use Superpowers writing-plans, execution-method selection, and the corresponding execution skill to build. </IMPORTANT>

Before continuing or starting changes, handle uncommitted changes through comet-classic/reference/dirty-worktree.md. If attribution shows a qualitative-change signal or file-count tripwire is hit, handle it through this file's "Upgrade Assessment".

Immediately execute: Use the Skill tool to load the openspec-apply-change skill. Skipping this step is prohibited.

<!-- external-openspec-skill-override --> External OpenSpec Skill override: Use only its apply semantics. Replace every direct official CLI, fixed-cwd, or fixed physical OpenSpec path instruction with comet classic openspec -- <args...> and the <classic-*> logical roots.

After the skill loads, use the current <change-name> as input and follow openspec-apply-change to execute the OpenSpec apply flow:

1. Run or follow comet classic openspec -- status --change "<name>" --json to confirm the schema and task artifact
2. Run or follow comet classic openspec -- instructions apply --change "<name>" --json to read OpenSpec's apply instructions, contextFiles, task progress, and dynamic instruction
3. Read every context file listed by the apply instructions; do not implement from stale conversation context or a handwritten tasks loop alone
4. Complete unchecked tasks one by one according to the apply instructions, keeping changes minimal and focused
5. After each completed task:

• Run the project formatter (e.g., mvn spotless:apply, npm run format)
• Run related tests to confirm pass
• Mark the corresponding task complete according to openspec-apply-change
• Commit code, commit message format: tweak: <brief change description>

1. After all tasks complete, explicitly run relevant project tests and build commands

During tweak execution, whenever running programs, tests, builds, or manual verification results in crashes, abnormal behavior, test failures, or build failures, you must use the Skill tool to load the Superpowers systematic-debugging skill. Do not propose or implement source code fixes before completing root cause investigation.

For specific investigation, minimal failing test, fix verification, and keeping the current change verification loop, follow comet-classic/reference/debug-gate.md.

Upgrade assessment check: Continuously judge throughout build, and do a consolidated re-check before running the build→verify guard. Assessment uses a three-layer division of labor (see "Upgrade Assessment" section): qualitative-change signals rely on agent semantic recognition, file count is only a hint delegated to the user, and the scale script only governs verification weight. When a qualitative-change signal or file-count tripwire is hit, do not upgrade on your own or decide to continue on your own — must pause per comet-classic/reference/decision-point.md and delegate the decision to the user: continue the tweak lightweight flow, or upgrade to the full /comet-classic.

1. Run phase guard to transition build → verify:

comet guard <change-name> build --apply

State automatically updates to phase: verify, verify_result: pending, then enter verification.

3. Verification (preset verify)

Reuse /comet-verify; let comet-verify's scale assessment decide lightweight or full verification.

Immediately execute: Use the Skill tool to load the comet-verify skill. Skipping this step is prohibited.

Delta-spec verification routing: tweak accepts delta spec as a normal artifact. If this change created a delta spec, explicitly set full verification mode before entering comet-verify, to run OpenSpec-native verification (openspec-verify-change) covering delta-spec consistency:

comet state set <change-name> verify_mode full

A tweak without delta spec usually meets lightweight verification conditions (≤ 3 tasks, changed files below the scale threshold); comet-verify's scale assessment selects the lightweight verification path (6 quick checks). If the user wants to add review, run comet state set <name> review_mode standard or thorough before verification.

After verification passes, record .comet.yaml verify_result as pass according to /comet-verify rules, must not skip this status before archiving. After verification passes, still enter /comet-archive's final archive confirmation; do not automatically run the archive script.

4. Archive (preset archive)

Reuse /comet-archive. Must satisfy verify_result: pass in .comet.yaml before archiving, and wait for /comet-archive's final archive confirmation.

Immediately execute: Use the Skill tool to load the comet-archive skill to archive. Skipping this step is prohibited.

Continuous Execution Mode

<IMPORTANT> Tweak workflow is one-time continuous execution. After invoking /comet-tweak, agent must automatically advance through tweak steps, without pausing to wait for user input mid-way.

Exception: when .comet.yaml has auto_transition: false, end the current invocation at each phase boundary and return control with HINT; the user may run the next phase later. This is a manual handoff, not a new confirmation point.

The following genuine user decisions still pause:

1. Encountering an upgrade-assessment signal (see "Upgrade Assessment" section). Pause, present the choices, and wait for the user to explicitly choose: continue the tweak lightweight flow, or upgrade to the full /comet-classic workflow
2. Verify-phase acceptance of WARNING/SUGGESTION deviations, Spec drift handling, or strategy after the automatic repair limit; the first 3 clearly repairable failures close automatically
3. One final pre-archive confirmation chooses whether to archive and how to deliver the archive commit

Execution order: quick open → build (with upgrade assessment) → verification → archive → complete

After each phase completes, immediately enter next phase. Within each phase, must still call corresponding Comet/OpenSpec/Superpowers skill according to above requirements; if the called skill has its own user decision points, follow that skill's rules. </IMPORTANT>

Upgrade Assessment

Tweak upgrade assessment only decides whether to move from the lightweight preset to full; delta spec alone is not an upgrade reason, file count never upgrades automatically, and comet state scale only decides verification weight.

If /comet-classic passes an intent frame from the entry, tweak must recheck risk_signal and escalation signals only before build: new capability, public API, schema change, cross-module coordination, or deep architecture work. When any signal matches, enter the existing escalation decision point. Delta spec remains a normal tweak artifact and must not trigger escalation by itself; do not reimplement entry intent recognition.

Continuously check these qualitative-change signals: cross-module coordination, needing a new capability, database schema changes, introducing a new public API, or touching a deep architecture problem; plus the tweak-specific signal: needing to split into multiple OpenSpec changes. If any signal appears, the agent must not self-upgrade or self-decide to continue.

The file-count tripwire is only a prompt: when changed files exceed the hint threshold (for example > 6 files), ask the user whether to continue tweak or upgrade full. More files do not necessarily mean qualitative change. Tweaks often come with delta spec or config changes, so their reach is naturally wider than a bug fix, hence the higher threshold than hotfix.

When a qualitative-change signal or file-count tripwire is hit, must pause under the `comet-classic/reference/decision-point.md` protocol and wait for the user's explicit choice. Do not directly enter /comet-design; do not automatically add a Design Doc.

After the user chooses upgrade (option B), use the legal state-machine upgrade channel, a single command that converts the preset workflow to full and rolls back to design:

comet state transition <name> preset-escalate

This command atomically sets workflow/classic_profile to full, rolls phase back to design, clears design_doc, and clears preset-only build_mode, tdd_mode, review_mode, isolation, and verify_mode. Then add the Design Doc on the current change: immediately use the Skill tool to load the `comet-design` skill. On entering build, run the full joint workflow-configuration decision again.

When the user chooses continue (option A), continue the tweak workflow and record the user's reason for continuing.

Exit Conditions

• Change completed, tests pass
• Change archived
• If spec changed, synced to main spec
• Phase guard: Before build → verify run comet guard <change-name> build --apply; before verify → archive follow /comet-verify and run comet guard <change-name> verify --apply

Automatic Handoff to Next Phase

Follow comet-classic/reference/auto-transition.md. Key command:

comet state next <name>

• NEXT: auto → invoke the skill pointed to by SKILL to continue tweak workflow (phase: build returns comet-tweak, verify returns comet-verify, archive returns comet-archive)
• NEXT: manual → do not invoke the next skill; return control with HINT, end the invocation, and do not create another confirmation point
• NEXT: done → workflow is complete, no further action needed