<< All versions

Skill v1.0.0

currentAutomated scan100/100
sands-lab/nika/link-fault-skill
──Details
PublishedOctober 22, 2026 at 05:28 PM
Content Hashsha256:63d5187f6a523088...
Git SHA4e450114d7cb
──Files
Files (1 file, 3.3 KB)
SKILL.md3.3 KBactive
SKILL.md · 46 lines · 3.3 KB

version: "1.0.0" name: link-fault-skill description: Identify link_flap, link_down, and link_detach faults. Use when an interface is DOWN, missing, detached, repeatedly flapping, or shows network-down history.


Link Faults

What These Faults Mean

  • link_detach: the expected interface is missing entirely from the device.
  • link_down: the interface exists but is down and there is no evidence it is intentionally flapping.
  • link_flap: the interface repeatedly transitions down and up, so the device may look healthy by the time it is inspected.

Leading Signals

  • Interface state (ip link show) proves whether the interface exists and whether it is up right now.
  • Direct evidence of repeated link transitions — climbing carrier-changes, kernel link events, or any agent on the host repeatedly toggling the interface — is stronger than transient DHCP fallout alone.
  • Link history (startup logs, dhcp_link_history.py) is important when the interface has already recovered by the time you inspect it.

Exact Calls

  • get_host_net_config(host_name="<host>")
  • exec_shell(host_name="<host>", command="ip link show")
  • Check for repeated link transitions: interface counters (ip -s link show <iface>), kernel link events (dmesg | grep -i link), or any process or scheduled job repeatedly toggling the interface.
  • exec_shell(host_name="<host>", command="tail -100 /var/log/startup.log")
  • python diagnosis-methodology-skill/scripts/dhcp_link_history.py <host>

Submit on match

When direct evidence (current interface state, repeated link transitions, or startup-log link history) is sufficient to identify the fault, submit. Do not chain extra probes once the family is confirmed.

Recovered Interface Rule

  • If the interface is already back UP when you inspect it, history can keep the link family alive — but only with direct evidence of past instability, not inference from downstream symptoms.
  • Submit link_flap only with direct evidence of repeated transitions (climbing carrier-changes over a short window, kernel link events, or an active agent toggling the interface). A single non-zero carrier_changes value on its own is not enough — small counts can be normal startup history.
  • If the interface recovered but there is no evidence of repeated flap, prefer link_down only when startup or DHCP history contains direct link errors (such as Network is down), or when the interface is observed DOWN on one probe and UP on a later probe.
  • If the host access interface is UP but the host briefly lost IP or default route, check link history once before leaving the link family.

Cross-Family Guardrails

  • If the host access interface is present and UP but the host lacks IP or default route, do not switch immediately. First rule out an active or recently-recovered link fault using interface counters or kernel link history. If the link is steady and the host's missing-IP / wrong-config state is distinctive (same-subnet peers don't share it), the case belongs to host-ip-skill.
  • Do not let one no-route snapshot outrank direct evidence of repeated link transitions.
  • A later recovered DHCP lease does not by itself reclassify a host-side missing-IP fault as a link fault.
  • Never submit link_down without first checking whether the interface is flapping rather than statically down.
All versions