version: "1.0.0" name: mac-address-conflict-skill description: Identify duplicate hardware (MAC) addresses on the same network segment. Use when a helper surfaces a concrete duplicate link/ether value or an ARP entry that flips between two MACs for one IP.

MAC Address Conflict

What This Fault Means

• mac_address_conflict means two different devices present the same Layer 2 hardware identity on the network.
• This can make ARP, switching, and control-plane behavior unstable or intermittent even when small ping samples sometimes pass.

Leading Signals

• Two devices show the exact same link/ether MAC.
• Witness ARP data flips one MAC across multiple IPs, and direct device-side MAC collection confirms the duplicate.
• The decisive proof is the duplicate MAC itself, not only the downstream symptoms.

Exact Calls

• python diagnosis-methodology-skill/scripts/l2_snapshot.py
• python diagnosis-methodology-skill/scripts/network_inventory.py summary
• python diagnosis-methodology-skill/scripts/network_inventory.py connected <device>
• exec_shell(host_name="<host>", command="ip link show")
• exec_shell(host_name="<witness_host>", command="arp -n")

Required Tool Usage

• l2_snapshot is the MAC-inventory and duplicate-MAC proof tool; network_inventory only exposes topology views (summary, connected).
• Direct link/ether comparison is stronger than ARP-table symptoms.

Sweep Rules

• If the affected segment is unknown, start with the broad MAC inventory helper.
• The default MAC and L2 sweeps must include server-side devices (for example load balancers and application servers), not only hosts, routers, and switches.
• Compare one full Layer 2 domain at a time: hosts, gateway, switch/bridge, then adjacent infrastructure if needed.
• Clean L3-L7 checks increase the priority of direct MAC comparison; they do not clear this fault.

Guardrails

• Do not rule this out from sampled reachability alone.
• Do not rely on ARP tables alone when direct MAC comparison is available.
• Bridge membership such as ethX -> br0 is topology information, not MAC-conflict proof by itself.
• Identical link/ether values on two different routers or hosts are a real L2 identity fault, not a measurement artifact.