sduwby/ansysagent/maxwell-motor-workflow

Claude Code and agent skill by sduwby/ansysagent

Trust tier 2
  • community
LLM review pending
Source check pending

Checking that the SKILL.md file is still in the repository.

Maxwell 2D 永磁同步电机电磁仿真标准流程（建模→材料→绕组→仿真→结果）

Install

npx vskill@latest install sduwby/ansysagent/maxwell-motor-workflow

SKILL.md

Maxwell 电机仿真标准流程

适用场景

用于完成永磁同步电机（PMSM）从零开始的 Maxwell 2D 电磁仿真，覆盖从参数确认到结果提取的全流程。

前置确认（执行前须与用户核实）

  • 极槽配合（默认 36 槽 / 6 极）
  • 定子外径 / 内径（mm）
  • 转子外径 / 永磁体厚度（mm）
  • 额定转速（rpm）、额定电流（A 峰值）
  • 磁钢牌号（如 N35、N42）

执行流程

Step 1 — 连接 AEDT
delegate_to_agent(agent_name="maxwell", task="connect_aedt: 连接 Maxwell 2D 设计环境")
Step 2 — 建立电机几何
delegate_to_agent(agent_name="maxwell", task="create_motor_geometry:
  slots=36, poles=6,
  stator_outer_diameter=150, stator_inner_diameter=90,
  rotor_outer_diameter=89.5, magnet_thickness=5,
  stack_length=80")
Step 3 — 分配材料
delegate_to_agent(agent_name="maxwell", task="assign_material:
  - 定子铁芯 → 硅钢片（M19_24G 或 create_custom_material 自定义 B-H 曲线）
  - 永磁体  → N35（coercivity / remanence 参数参考供应商数据）
  - 绕组    → copper（电导率 5.8e7 S/m）")
Step 4 — 配置绕组激励
delegate_to_agent(agent_name="maxwell", task="setup_winding:
  phases=3, layers=2, current_amplitude={额定电流}, frequency=50")
Step 5 — 添加求解设置
delegate_to_agent(agent_name="maxwell", task="add_solution_setup:
  stop_time=0.02, time_step=0.0002, mesh_link=True")
Step 6 — 运行仿真
delegate_to_agent(agent_name="maxwell", task="run_simulation")
Step 7 — 提取结果
delegate_to_agent(agent_name="maxwell", task="get_torque: 提取平均转矩和转矩脉动")
delegate_to_agent(agent_name="maxwell", task="get_back_emf: 提取反电动势波形")
delegate_to_agent(agent_name="maxwell", task="get_losses: 提取铜损和铁损")

常见问题与处理

问题原因解决方案
仿真不收敛时间步过大将 time_step 减半
转矩脉动过大槽口宽度不合适调整 slot_opening 参数
铁损偏高B-H 曲线缺少高频项补充 Kh/Kc/Ke 系数

注意事项

  • 建立几何前务必与用户确认关键参数，几何创建后修改代价较高
  • 仿真完成后，将关键数值（转矩、效率、温升上限）汇报给用户
  • 如需热分析，完成本流程后调用 thermal-em-coupling 技能

Security

  • Security scanPassed, 100 of 100Pattern checks on the skill's files.
  • Model reviewNot runA model review is scheduled for the next rescan.

See the full security report

Quality evaluation

  • Task evaluationNot runNo evaluation yet. Run one in Skill Studio.

See evaluation results

Source

Popularity

Repository stars
93
Repository forks
2
7-day trend score
0

Stars and forks are for the whole GitHub repository, not this skill alone. Not refreshed yet.

Works with

Any agent vskill installs to: 56 targets in all. These 39 have a page on this site.

  • Claude Code
  • Cursor
  • GitHub Copilot
  • Windsurf
  • Codex
  • Gemini CLI
  • Cline
  • Amp
  • Roo Code
  • Goose
  • Continue
  • Kilo Code
  • Junie
  • Trae
  • OpenHands
  • Qwen Code
  • AI Agent
  • Tabnine Chat
  • Sourcegraph Cody
  • Amazon Q
  • Firebase Genkit
  • Sweep
  • Devin
  • Phind
  • Mentat
  • Claude Desktop
  • Aider
  • GPT Pilot
  • Plandex
  • bolt.new
  • v0
  • Replit Agent
  • Anse
  • TypingMind
  • BetterChatGPT
  • LibreChat
  • Warp AI
  • Pieces
  • Fig AI
Embed badge
vskill VERIFIED badge
[![vskill VERIFIED](https://verified-skill.com/api/v1/skills/sduwby/ansysagent/maxwell-motor-workflow/badge)](https://verified-skill.com/skills/sduwby/ansysagent/maxwell-motor-workflow)

Something wrong with this skill or its page? Tell us.