sickn33/agentic-awesome-skills/hardware-security

⚠️ AUTHORIZED USE ONLY

This skill is for educational purposes or authorized security assessments only.

You must have explicit, written permission from the system owner before using this tool.

Misuse of this tool is illegal and strictly prohibited.

Mandatory confirmation gate

Before running any command that probes, exploits, changes, persists on, extracts data from, or attempts credential access against a target:

1. Ask the user to state the exact target URL, IP, account, or resource.

2. Ask the user to confirm written authorization and the permitted scope.

3. Show the exact command(s) and explain their expected effect.

4. Wait for explicit confirmation in the current conversation.

Without that confirmation, remain read-only and provide defensive guidance only. Prefer a sandbox, disposable VM, or controlled lab.

Hardware / Embedded Interface Security

When to Use

• Physical security review of a device you own or are authorized to test.
• Locating and documenting exposed debug interfaces.

适用场景

• UART / JTAG / SWD 调试口发现
• 启动日志、root shell、引导打断
• 配合拆机提取 Flash
• 安全启动/加密 Flash 的可行性评估（非破坏性优先）

工作流

□ 拆解授权设备；拍照标注测试点
□ 万用表找 GND/VCC/TX/RX；逻辑电平 1.8/3.3/5V
□ 断电确认接线与电平；不要将 USB-TTL VCC 直接接到已供电目标，避免反向供电
□ USB-TTL 先仅连接 GND 与适配器 RX 读取目标 TX；记录波特率
□ JTAG：枚举 IDCODE；评估是否锁定
□ 提取镜像 → 交接 firmware-pentest / ghidra

工具链

参考

• references/debug-interface-triage.md
• ../firmware-pentest/ ../ot-ics/

路由上下文

上游: MASTER R34 MUST NOT: 未授权拆机/损坏他人设备

任务完成自检

• [ ] 是否记录接口电平与引脚图？
• [ ] 镜像是否哈希保全？
• [ ] Checklist？

Limitations

• Requires physical access and basic HW tooling (adapters, multimeter).
• Soldered or disabled debug ports raise the difficulty sharply.

Adapted from zhaoxuya520/reverse-skill (MIT).