sickn33/agentic-awesome-skills/planning-and-task-breakdown

Supporting material availability

This catalog copy contains the inline guidance below, but does not include the following supporting paths. They are external prerequisites, not bundled files:

• <support-root>/references/definition-of-done.md

Obtain the required material from the declared upstream source, or from a user-provided installation of that source. Resolve each path relative to that installation, inspect its contents, and verify any applicable license and execution prerequisites. Do not run a command or claim a referenced procedure was followed until its required file exists. Do not fabricate the missing scripts or treat an unrelated file with the same name as equivalent. Independent steps fully documented here can proceed within the user’s authorized scope; report any dependent step as unavailable.

Planning and Task Breakdown

Overview

Decompose work into small, verifiable tasks with explicit acceptance criteria. Good task breakdown is the difference between an agent that completes work reliably and one that produces a tangled mess. Every task should be small enough to implement, test, and verify in a single focused session.

When to Use

• You have a spec and need to break it into implementable units
• A task feels too large or vague to start
• Work needs to be parallelized across multiple agents or sessions
• You need to communicate scope to a human
• The implementation order isn't obvious

When NOT to use: Single-file changes with obvious scope, or when the spec already contains well-defined tasks.

The Planning Process

Step 1: Enter Plan Mode

Before writing any code, operate in read-only mode:

• Read the spec and relevant codebase sections
• Identify existing patterns and conventions
• Map dependencies between components
• Note risks and unknowns

Do NOT write code during planning. The output is a plan document, not implementation.

Step 2: Identify the Dependency Graph

Map what depends on what:

Database schema
    │
    ├── API models/types
    │       │
    │       ├── API endpoints
    │       │       │
    │       │       └── Frontend API client
    │       │               │
    │       │               └── UI components
    │       │
    │       └── Validation logic
    │
    └── Seed data / migrations

Implementation order follows the dependency graph bottom-up: build foundations first.

Step 3: Slice Vertically

Instead of building all the database, then all the API, then all the UI — build one complete feature path at a time:

Bad (horizontal slicing):

Task 1: Build entire database schema
Task 2: Build all API endpoints
Task 3: Build all UI components
Task 4: Connect everything

Good (vertical slicing):

Task 1: User can create an account (schema + API + UI for registration)
Task 2: User can log in (auth schema + API + UI for login)
Task 3: User can create a task (task schema + API + UI for creation)
Task 4: User can view task list (query + API + UI for list view)

Each vertical slice delivers working, testable functionality.

Step 4: Write Tasks

Each task follows this structure:

## Task [N]: [Short descriptive title]
 
**Description:** One paragraph explaining what this task accomplishes.
 
**Acceptance criteria:**
-[ ] [Specific, testable condition]
-[ ] [Specific, testable condition]
 
**Verification:**
-[ ] Tests pass: `npm test -- --grep "feature-name"`
-[ ] Build succeeds: `npm run build`
-[ ] Manual check: [description of what to verify]
 
**Dependencies:** [Task numbers this depends on, or "None"]
 
**Files likely touched:**
-`src/path/to/file.ts`
-`tests/path/to/test.ts`
 
**Estimated scope:** [Small: 1-2 files | Medium: 3-5 files | Large: 5+ files]

Step 5: Order and Checkpoint

Arrange tasks so that:

1. Dependencies are satisfied (build foundation first)
2. Each task leaves the system in a working state
3. Verification checkpoints occur after every 2-3 tasks
4. High-risk tasks are early (fail fast)

Add explicit checkpoints:

## Checkpoint: After Tasks 1-3
-[ ] All tests pass
-[ ] Application builds without errors
-[ ] Core user flow works end-to-end
-[ ] Review with human before proceeding

Task Sizing Guidelines

If a task is L or larger, it should be broken into smaller tasks. An agent performs best on S and M tasks.

When to break a task down further:

• It would take more than one focused session (roughly 2+ hours of agent work)
• You cannot describe the acceptance criteria in 3 or fewer bullet points
• It touches two or more independent subsystems (e.g., auth and billing)
• You find yourself writing "and" in the task title (a sign it is two tasks)

Plan Document Template

# Implementation Plan: [Feature/Project Name]
 
## Overview
[One paragraph summary of what we're building]
 
## Architecture Decisions
-[Key decision 1 and rationale]
-[Key decision 2 and rationale]
 
## Task List
 
### Phase 1: Foundation
-[ ] Task 1: ...
-[ ] Task 2: ...
 
### Checkpoint: Foundation
-[ ] Tests pass, builds clean
 
### Phase 2: Core Features
-[ ] Task 3: ...
-[ ] Task 4: ...
 
### Checkpoint: Core Features
-[ ] End-to-end flow works
 
### Phase 3: Polish
-[ ] Task 5: ...
-[ ] Task 6: ...
 
### Checkpoint: Complete
-[ ] All acceptance criteria met
-[ ] Ready for review
 
## Risks and Mitigations
| Risk | Impact | Mitigation |
|------|--------|------------|
| [Risk] | [High/Med/Low] | [Strategy] |
 
## Open Questions
-[Question needing human input]

Parallelization Opportunities

When multiple agents or sessions are available:

• Safe to parallelize: Independent feature slices, tests for already-implemented features, documentation
• Must be sequential: Database migrations, shared state changes, dependency chains
• Needs coordination: Features that share an API contract (define the contract first, then parallelize)

Common Rationalizations

Red Flags

• Starting implementation without a written task list
• Tasks that say "implement the feature" without acceptance criteria
• No verification steps in the plan
• All tasks are XL-sized
• No checkpoints between tasks
• Dependency order isn't considered

Verification

Before starting implementation, confirm:

• [ ] Every task has acceptance criteria
• [ ] Every task has a verification step
• [ ] Task dependencies are identified and ordered correctly
• [ ] No task touches more than ~5 files
• [ ] Checkpoints exist between major phases
• [ ] The human has reviewed and approved the plan

See Also

Acceptance criteria are per-task and answer "did we build the right thing?". They sit on top of the project-wide Definition of Done, the standing bar every task clears before it counts as done. See references/definition-of-done.md.

Limitations

• Use this skill only when the task clearly matches its upstream source and local project context.
• Verify commands, generated code, dependencies, credentials, and external service behavior before applying changes.
• Do not treat examples as a substitute for environment-specific tests, security review, or user approval for destructive or costly actions.