sickn33/antigravity-awesome-skills/debug-buttercup

Supporting material availability

This catalog copy contains the inline guidance below, but does not include the following supporting paths. They are external prerequisites, not bundled files:

• <support-root>/references/failure-patterns.md

Ask for the original supporting material or an existing installation before using a step that depends on these paths; this catalog does not identify a verified download source for them. Resolve each path relative to that installation, inspect its contents, and verify any applicable license and execution prerequisites. Do not run a command or claim a referenced procedure was followed until its required file exists. Do not fabricate the missing scripts or treat an unrelated file with the same name as equivalent. Independent steps fully documented here can proceed within the user’s authorized scope; report any dependent step as unavailable.

Debug Buttercup

When to Use

• Pods in the crs namespace are in CrashLoopBackOff, OOMKilled, or restarting
• Multiple services restart simultaneously (cascade failure)
• Redis is unresponsive or showing AOF warnings
• Queues are growing but tasks are not progressing
• Nodes show DiskPressure, MemoryPressure, or PID pressure
• Build-bot cannot reach the Docker daemon (DinD failures)
• Scheduler is stuck and not advancing task state
• Health check probes are failing unexpectedly
• Deployed Helm values don't match actual pod configuration

When NOT to Use

• Deploying or upgrading Buttercup (use Helm and deployment guides)
• Debugging issues outside the crs Kubernetes namespace
• Performance tuning that doesn't involve a failure symptom

Namespace and Services

All pods run in namespace crs. Key services:

Confirm the cluster context and installed Buttercup version; crs, labels, queue names and health paths below are deployment assumptions. diagnosis.sh and deployment/collect-logs.sh are not bundled here; do not invent or run substitute helpers. Read-only diagnostics may still expose credentials/records or add load. Select the correct container and redact logs/CLIENT LIST/OTEL variables before sharing; avoid dumping all environment values. Namespace scoping does not constrain node-level commands. Use XPENDING for delivered-unacknowledged group messages and XINFO GROUPS for lag; XLEN counts retained entries. Do not restart or change Redis durability settings as part of diagnosis without a separate scoped recovery plan.

Triage Workflow

Always start with triage. Run these three commands first:

# 1. Pod status - look for restarts, CrashLoopBackOff, OOMKilled
kubectl get pods -n crs -o wide
 
# 2. Events - the timeline of what went wrong
kubectl get events -n crs --sort-by='.lastTimestamp'
 
# 3. Warnings only - filter the noise
kubectl get events -n crs --field-selector type=Warning --sort-by='.lastTimestamp'

Then narrow down:

# Why did a specific pod restart? Check Last State Reason (OOMKilled, Error, Completed)
kubectl describe pod -n crs <pod-name> | grep -A8 'Last State:'
 
# Check actual resource limits vs intended
kubectl get pod -n crs <pod-name> -o jsonpath='{.spec.containers[0].resources}'
 
# Crashed container's logs (--previous = the container that died)
kubectl logs -n crs <pod-name> --previous --tail=200
 
# Current logs
kubectl logs -n crs <pod-name> --tail=200

Historical vs Ongoing Issues

High restart counts don't necessarily mean an issue is ongoing -- restarts accumulate over a pod's lifetime. Always distinguish:

• --tail shows the end of the log buffer, which may contain old messages. Use --since=300s to confirm issues are actively happening now.
• --timestamps on log output helps correlate events across services.
• Check Last State timestamps in describe pod to see when the most recent crash actually occurred.

Cascade Detection

When many pods restart around the same time, check for a shared-dependency failure before investigating individual pods. The most common cascade: Redis goes down -> every service gets ConnectionError/ConnectionRefusedError -> mass restarts. Look for the same error across multiple --previous logs -- if they all say redis.exceptions.ConnectionError, debug Redis, not the individual services.

Log Analysis

# All replicas of a service at once
kubectl logs -n crs -l app=fuzzer-bot --tail=100 --prefix
 
# Stream live
kubectl logs -n crs -l app.kubernetes.io/name=redis -f
 
# Collect all logs to disk (existing script)
bash deployment/collect-logs.sh

Resource Pressure

# Per-pod CPU/memory
kubectl top pods -n crs
 
# Node-level
kubectl top nodes
 
# Node conditions (disk pressure, memory pressure, PID pressure)
kubectl describe node <node> | grep -A5 Conditions
 
# Disk usage inside a pod
kubectl exec -n crs <pod> -- df -h
 
# What's eating disk
kubectl exec -n crs <pod> -- sh -c 'du -sh /corpus/* 2>/dev/null'
kubectl exec -n crs <pod> -- sh -c 'du -sh /scratch/* 2>/dev/null'

Redis Debugging

Redis is the backbone. When it goes down, everything cascades.

# Redis pod status
kubectl get pods -n crs -l app.kubernetes.io/name=redis
 
# Redis logs (AOF warnings, OOM, connection issues)
kubectl logs -n crs -l app.kubernetes.io/name=redis --tail=200
 
# Connect to Redis CLI
kubectl exec -n crs <redis-pod> -- redis-cli
 
# Inside redis-cli: key diagnostics
INFO memory          # used_memory_human, maxmemory
INFO persistence     # aof_enabled, aof_last_bgrewrite_status, aof_delayed_fsync
INFO clients         # connected_clients, blocked_clients
INFO stats           # total_connections_received, rejected_connections
CLIENT LIST          # see who's connected
DBSIZE               # total keys
 
# AOF configuration
CONFIG GET appendonly     # is AOF enabled?
CONFIG GET appendfsync   # fsync policy: everysec, always, or no
 
# What is /data mounted on? (disk vs tmpfs matters for AOF performance)

kubectl exec -n crs <redis-pod> -- mount | grep /data
kubectl exec -n crs <redis-pod> -- du -sh /data/

Queue Inspection

Buttercup uses Redis streams with consumer groups. Queue names:

# Check retained stream length (not consumer-group pending count)
kubectl exec -n crs <redis-pod> -- redis-cli XLEN fuzzer_build_queue
 
# Check consumer group lag
kubectl exec -n crs <redis-pod> -- redis-cli XINFO GROUPS fuzzer_build_queue
 
# Check pending messages per consumer
kubectl exec -n crs <redis-pod> -- redis-cli XPENDING fuzzer_build_queue build_bot_consumers - + 10
 
# Task registry size
kubectl exec -n crs <redis-pod> -- redis-cli HLEN tasks_registry
 
# Task state counts
kubectl exec -n crs <redis-pod> -- redis-cli SCARD cancelled_tasks
kubectl exec -n crs <redis-pod> -- redis-cli SCARD succeeded_tasks
kubectl exec -n crs <redis-pod> -- redis-cli SCARD errored_tasks

Consumer groups: build_bot_consumers, orchestrator_group, patcher_group, index_group, tracer_bot_group.

Health Checks

Pods write timestamps to /tmp/health_check_alive. The liveness probe checks file freshness.

# Check health file freshness
kubectl exec -n crs <pod> -- stat /tmp/health_check_alive
kubectl exec -n crs <pod> -- cat /tmp/health_check_alive

If a pod is restart-looping, the health check file is likely going stale because the main process is blocked (e.g. waiting on Redis, stuck on I/O).

Telemetry (OpenTelemetry / Signoz)

All services export traces and metrics via OpenTelemetry. If Signoz is deployed (global.signoz.deployed: true), use its UI for distributed tracing across services.

# Check if OTEL is configured
kubectl exec -n crs <pod> -- env | grep OTEL
 
# Verify Signoz pods are running (if deployed)
kubectl get pods -n platform -l app.kubernetes.io/name=signoz

Traces are especially useful for diagnosing slow task processing, identifying which service in a pipeline is the bottleneck, and correlating events across the scheduler -> build-bot -> fuzzer-bot chain.

Volume and Storage

# PVC status
kubectl get pvc -n crs
 
# Check if corpus tmpfs is mounted, its size, and backing type
kubectl exec -n crs <pod> -- mount | grep corpus_tmpfs
kubectl exec -n crs <pod> -- df -h /corpus_tmpfs 2>/dev/null
 
# Check if CORPUS_TMPFS_PATH is set
kubectl exec -n crs <pod> -- env | grep CORPUS
 
# Full disk layout - what's on real disk vs tmpfs
kubectl exec -n crs <pod> -- df -h

CORPUS_TMPFS_PATH is set when global.volumes.corpusTmpfs.enabled: true. This affects fuzzer-bot, coverage-bot, seed-gen, and merger-bot.

Deployment Config Verification

When behavior doesn't match expectations, verify Helm values actually took effect:

# Check a pod's actual resource limits
kubectl get pod -n crs <pod-name> -o jsonpath='{.spec.containers[0].resources}'
 
# Check a pod's actual volume definitions
kubectl get pod -n crs <pod-name> -o jsonpath='{.spec.volumes}'

Helm values template typos (e.g. wrong key names) silently fall back to chart defaults. If deployed resources don't match the values template, check for key name mismatches.

Service-Specific Debugging

For detailed per-service symptoms, root causes, and fixes, see references/failure-patterns.md.

Quick reference:

• DinD: kubectl logs -n crs -l app=dind --tail=100 -- look for docker daemon crashes, storage driver errors
• Build-bot: check build queue depth, DinD connectivity, OOM during compilation
• Fuzzer-bot: corpus disk usage, CPU throttling, crash queue backlog
• Patcher: LiteLLM connectivity, LLM timeout, patch queue depth
• Scheduler: the central brain -- kubectl logs -n crs -l app=scheduler --tail=-1 --prefix | grep "WAIT_PATCH_PASS\|ERROR\|SUBMIT"

Diagnostic Script

Run the automated triage snapshot:

bash {baseDir}/scripts/diagnose.sh

Pass --full to also dump recent logs from all pods:

bash {baseDir}/scripts/diagnose.sh --full

This collects pod status, events, resource usage, Redis health, and queue depths in one pass.

Limitations

• Use this skill only when the task clearly matches the scope described above.
• Do not treat the output as a substitute for environment-specific validation, testing, or expert review.
• Stop and ask for clarification if required inputs, permissions, safety boundaries, or success criteria are missing.