version: "1.0.0" name: architecture-design description: "Turn settled acceptance criteria into a logical architecture shape an agent can build against: components and responsibilities, the contracts between them, data flow and key state, trust and failure boundaries, and ADRs for hard-to-reverse decisions, with every criterion traced to the component responsible for it. Use AFTER acceptance-criteria and BEFORE techstack. Triggers: 'design', 'architecture', 'how should this be structured', 'shape the system', or any time you have settled acceptance criteria and need the intended shape. Scope: only within an Agent SDLC run (a spec chain exists), not on the bare word alone. Names the KIND of thing, never the concrete product (no Postgres, no React) - that is the techstack stage."

Design: shape the system, not the stack

Turn settled acceptance criteria into the logical shape the build is held to: what the components are, what each is responsible for, how they talk, how data flows, where the boundaries are, and why the irreversible calls were made. This is the first HOW stage, but it names the kind of thing only. Choosing concrete products and libraries is the next stage. Human-owned, agent-proposed: lead with a recommended shape and the alternatives, the user decides.

<HARD-GATE> Input is the ## Brief and ## Acceptance Criteria sections of docs/specs/<feature>/<feature>.md, resolved per the input-resolution rule (input-resolution) — a non-canonical source (prompt, doc, Linear) is materialized into those sections with a provenance marker first. Output is the ## Design section of the same file (and, at project level, the ## Architecture section of docs/specs/overview.md). Name the KIND of thing (relational store, message queue, single-page app), NEVER the concrete product (Postgres, SQS, React) - that is the techstack stage. Do NOT choose a stack, write a plan, break down tasks, or write code. If the criteria are unsettled or a criterion has no home in any sensible shape, STOP and loop back to acceptance-criteria. The terminal action is an approved design handed to the techstack stage. </HARD-GATE>

The shape bar (when a design is build-ready)

A design is done only when all of these hold:

1. Every criterion traces to a component. Each AC-N maps to the component(s) responsible for

satisfying it. A criterion with no home means a component is missing or the criterion belongs elsewhere. This traceability is the design analogue of the verification map: it is what makes the shape checkable.

1. Every component has one responsibility. One reason to change. A component you describe with

"and", or a "manager / util / misc" catch-all, is not done being decomposed.

1. Contracts are explicit. Each boundary between components states its inputs, outputs, and

error semantics. Hyrum's Law: every observable behavior becomes something others depend on, so state the contract rather than leaving it implicit.

1. Data flow and key state are defined. What data moves where, and what state lives where, at

the logical level (the kind of store, not the product).

1. Trust and failure boundaries are named. Where untrusted input crosses in, and what happens

when each part fails.

1. Hard-to-reverse decisions are ADRs. Recorded with the WHY (see ADR test below).
2. No concrete product named. The moment a library or product appears, you have drifted into

the techstack stage.

The design / techstack line

Design names the kind; techstack names the product. Relational store vs Postgres. Message queue vs SQS. Single-page app vs React. Event-driven vs Kafka. If the choice is "which shape", it is here; if it is "which product implements the shape", it is the next stage. When in doubt, state the kind and defer the product.

Checklist (do in order)

1. Load inputs read the ## Brief and ## Acceptance Criteria sections of

docs/specs/<feature>/<feature>.md, root CONTEXT.md, and constitution.md. Confirm the criteria are settled; if not, loop back. At feature level, also read the existing architecture: the code, the ## Architecture section of docs/specs/overview.md, and existing ADRs in docs/specs/adr/.

1. Set level project (clean repo, no ## Architecture in overview.md, shaping the whole system) or feature

(existing project, fitting one piece in). This routes what you produce (see Two levels).

1. Propose the component decomposition lead with a recommended set of components and their

single responsibilities, plus the alternatives and tradeoffs, per the recommend-and-alternatives rule. At feature level, identify which existing components change and what new ones are needed, reusing existing patterns. If the shape or the tradeoff between candidates would land better drawn than described, read the visual-aid discipline ([visual-aids](../getting-started/reference/visual-aids.md)) now and apply it here.

1. Define the contracts for each boundary, state inputs, outputs, and error semantics.

Validate untrusted input at the boundary, not deep inside.

1. Define data flow and key state logically (the kind of store and the shape of the data), not

the product.

1. Name trust and failure boundaries where untrusted input enters, and the failure mode of

each component.

1. Record ADRs for each decision that is hard-to-reverse AND surprising-without-context AND a

real tradeoff, in docs/specs/adr/. At feature level, any deviation from an existing pattern is exactly such a decision.

1. Build the criterion-to-component map one row per AC-N -> responsible component(s). Every

criterion appears; no orphans, no components unjustified by a criterion.

1. Constitution Check confirm the shape violates no MUST principle in constitution.md. Flag

any conflict and resolve it (or loop) before proceeding.

1. Present in chunks and settle show the shape in pieces small enough to actually review, get

approval, write the artifact(s).

1. Hand off tell the user it is ready for the techstack stage. Do not choose the stack

yourself. If Linear sync is enabled in .agent-sdlc/config.json, also perform this stage's action via the linear-sync skill.

Principles

• Shape, not stack. Name the kind, defer the product. This is the whole discipline of the

stage.

• Contract-first. Settle the boundaries between components before their internals.
• Recommend, don't just ask. Lead with a recommended shape and the alternatives; the user

decides.

• YAGNI for architecture. The simplest shape that satisfies the criteria. An abstraction with

one caller is a cost, not flexibility; add seams when a real second case arrives.

• Traceability is the proof. If a criterion does not map to a component, the design is not

done.

• Fit before invent (feature level). Reuse existing patterns; a deviation needs an ADR.
• Code over questions. Read the existing architecture instead of asking about it.
• Loop, don't force. A criterion that will not sit in any sane shape usually means the criteria

are wrong. Go back.

Rationalizations (excuses to skip the bar, and the rebuttal)

Red flags (stop and fix)

• A concrete product or library name anywhere in the design.
• A component with more than one responsibility, or a catch-all (manager / util / misc).
• A criterion with no component, or a component justified by no criterion.
• Contracts described only in prose, with no inputs / outputs / errors.
• A hard-to-reverse decision made silently, with no ADR.
• The shape is more elaborate than the criteria require.

Done when

• Every acceptance criterion traces to a responsible component.
• Every component has one responsibility and explicit contracts with its neighbors.
• Data flow and key state are defined; trust and failure boundaries are named.
• Hard-to-reverse decisions are recorded as ADRs.
• No concrete product or library is named.
• Nothing contradicts constitution.md.
• The user has approved the design.

The artifact (output)

The ## Design section of docs/specs/<feature>/<feature>.md, containing only:

• Components each with: name, single responsibility, the kind of thing it is (logical), and

its contracts (inputs, outputs, error semantics) with neighbors.

• Data flow and key state logical, product-free.
• Trust and failure boundaries.
• Criterion-to-component map AC-N -> component(s), one row each.
• ADRs created links into docs/specs/adr/.
• Glossary terms touched mirrored into CONTEXT.md.

No concrete stack, no plan, no tasks. Those are later stages.

Checker grammar (what sdlc-check parses — emit exactly this)

The gate/build/pr-review checker resolves the criterion -> component chain by parsing this section literally. Emit these exact shapes or the links parse as zero:

• Components are a numbered, bold-lead list under a ### Components subheading (the exact word;

### Component also matches): 1. **Name** — responsibility. A bulleted list (- **Name**) parses as zero components — the leading number is load-bearing. Each entry's ordinal becomes its C-N id.

• Components that change but aren't numbered here (e.g. a gate/build/pr-review skill text) go

under a ### Outside the checker subheading (matched /outside the checker/i; a trailing parenthetical like "(changed components)" is fine) as the same numbered bold-lead list — its entries become real external components (C-ext-N), resolvable by name. There is no string escape-hatch: a component cited but neither numbered nor declared here is a dangling-reference finding.

• Component citations resolve by an anchored, whole-name match of the component NAME (in a plan's

*Component:* field or a Criterion -> Component map row) — a dangling name that merely contains a real component name no longer resolves. `none` is the only null marker (exact, lowercased, no trailing text).

• Criterion -> component map: a table whose 2nd-column header matches `/component/i`; each

cell cites component name(s). The row is non-dangling if at least one known component name appears anywhere in the cell — the checker scans the whole cell, it does not validate each comma-separated name independently. So a typo beside a real name is not caught: name every component correctly (a mis-typed name rides through unflagged as long as a valid one is present).

Two levels: project vs feature

Same skill, two scopes, decided in step 2.

Project (clean repo, shaping the whole system): write the ## Architecture section of docs/specs/overview.md, the north-star shape the whole repo shares (top-level components, their contracts, cross-cutting concerns like auth and error handling and observability as logical shapes). The first feature's ## Design then references it.

Feature (existing project, fitting one piece in): write the ## Design section of docs/specs/<feature>/<feature>.md only. Fit the existing architecture, name which existing components change and which are new, and log any deviation from existing patterns as an ADR.

Conventions

• Lives as the ## Design section of docs/specs/<feature>/<feature>.md; the project-wide shape lives

in the ## Architecture section of docs/specs/overview.md (root specs/ in a repo that already uses it — the back-compat rule in getting-started) — process record, apart from the repo's product documentation pages.

• Reads the ## Brief and ## Acceptance Criteria sections of the same file; references AC-N IDs

in the criterion-to-component map.

• Stops at logical shape. Concrete products and libraries are the techstack stage.
• ADRs in docs/specs/adr/, created via the three-part test (hard-to-reverse AND surprising AND a real

tradeoff).

• Downstream consumers: the techstack stage (picks a product per component), the plan stage (built

against this shape), the verify gate (checks the criterion -> component -> task chain), and the Review panel (Architecture and Spec Conformance axes).