wedsamuel1230/arduino-skills/readme-generator

uv run --no-project scripts/generate_readme.py --interactive

uv run --no-project scripts/generate_readme.py --project "Weather Station" --board "ESP32" --output README.md

uv run --no-project scripts/generate_readme.py --scan /path/to/arduino/project --output README.md

1. Project name and one-line description
2. What problem does it solve / why did you build it?
3. Main features (3-5 bullet points)
4. Hardware components used
5. Software libraries required
6. Any photos/videos/GIFs available?
7. License preference (MIT recommended for open source)
8. Target audience (beginners/intermediate/advanced)

# 🎯 [Project Name]
 
![Project Status](https://img.shields.io/badge/status-active-brightgreen)
![Platform](https://img.shields.io/badge/platform-ESP32-blue)
![License](https://img.shields.io/badge/license-MIT-green)
 
> One-line description of what this project does and why it's useful.
 
![Project Photo/GIF](images/project-demo.gif)
 
## 📋 Table of Contents
 
-[Overview](#overview)
-[Features](#features)
-[Hardware Components](#hardware-components)
-[Wiring Diagram](#wiring-diagram)
-[Software Dependencies](#software-dependencies)
-[Installation](#installation)
-[Configuration](#configuration)
-[Usage](#usage)
-[Troubleshooting](#troubleshooting)
-[Contributing](#contributing)
-[License](#license)
-[Acknowledgments](#acknowledgments)
 
## 🔍 Overview
 
[2-3 paragraphs explaining:]
-What the project does
-Why you built it / what problem it solves
-Who it's for (target audience)
 
### Demo
 
[Embed video or GIF showing project in action]
 
## ✨ Features
 
-✅ Feature 1 - brief description
-✅ Feature 2 - brief description
-✅ Feature 3 - brief description
-🚧 Planned: Feature 4 (coming soon)
 
## 🔧 Hardware Components
 
| Component | Quantity | Purpose | Notes |
|-----------|----------|---------|-------|
| [MCU Board] | 1 | Main controller | [version/variant] |
| [Sensor 1] | 1 | [function] | [I2C address, etc.] |
| [Display] | 1 | User interface | [resolution] |
| ... | ... | ... | ... |
 
**Estimated Cost:** $XX-XX
 
### Where to Buy
 
-[Component 1](link) - Amazon/AliExpress
-[Component 2](link) - Adafruit/SparkFun
 
## 📐 Wiring Diagram
 
![Wiring Diagram](images/wiring-diagram.png)
 
### Pin Connections
 
| MCU Pin | Component | Pin | Function |
|---------|-----------|-----|----------|
| GPIO21 | BME280 | SDA | I2C Data |
| GPIO22 | BME280 | SCL | I2C Clock |
| GPIO4 | LED | Anode | Status indicator |
| ... | ... | ... | ... |
 
## 💻 Software Dependencies
 
### Required Software
 
-[Arduino IDE](https://www.arduino.cc/en/software) (v2.0+) or [PlatformIO](https://platformio.org/)
-[Board package] - [installation link]
 
### Required Libraries
 
| Library | Version | Purpose | Install via |
|---------|---------|---------|-------------|
| [Library1] | >=1.0.0 | [function] | Library Manager |
| [Library2] | >=2.3.0 | [function] | Library Manager |
| ... | ... | ... | ... |
 
## 📦 Installation
 
### Option 1: Arduino IDE
 
1.**Install Arduino IDE**
   -Download from [arduino.cc](https://www.arduino.cc/en/software)
   
2.**Add Board Support** (if using ESP32/RP2040)
   ```
   File → Preferences → Additional Board Manager URLs:
   https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
   ```
   Then: Tools → Board → Boards Manager → Search "[board]" → Install
 
3.**Install Required Libraries**
   -Sketch → Include Library → Manage Libraries
   -Search and install each library from the table above
 
4.**Clone or Download This Repository**
   ```bash
   git clone https://github.com/[username]/[repo-name].git
   ```
   Or download ZIP and extract
 
5.**Open the Project**
   -Open `[project-name].ino` in Arduino IDE
 
### Option 2: PlatformIO (Recommended for Advanced Users)
 
1.Install [VS Code](https://code.visualstudio.com/) + [PlatformIO extension](https://platformio.org/install/ide?install=vscode)
 
2.Clone and open:
   ```bash
   git clone https://github.com/[username]/[repo-name].git
   cd [repo-name]
   code .
   ```
 
3.PlatformIO will automatically install dependencies from `platformio.ini`
 
## ⚙️ Configuration
 
Before uploading, customize `config.h`:
 

 
### Environment-Specific Settings
 
| Setting | Development | Production |
|---------|-------------|------------|
| DEBUG_MODE | true | false |
| SERIAL_BAUD | 115200 | 9600 |
| SLEEP_INTERVAL | 10s | 300s |
 
## 🚀 Usage
 
### Basic Operation
 
1. **Power On** - Connect USB or battery
2. **Wait for Boot** - Status LED blinks during initialization
3. **[Normal Operation]** - Description of what happens
 
### LED Status Indicators
 
| LED State | Meaning |
|-----------|---------|
| Solid Green | Normal operation |
| Blinking Blue | WiFi connecting |
| Red Flash | Error (check serial) |
 
### Serial Monitor
 
Open Serial Monitor at 115200 baud to see:

 
### Web Interface (if applicable)
 
Navigate to `http://[device-ip]` to access:
- Real-time sensor readings
- Configuration panel
- Data export
 
## ❓ Troubleshooting
 
### Common Issues
 
<details>
<summary><b>Upload fails: "Failed to connect"</b></summary>
 
**ESP32:** Hold BOOT button while clicking Upload, release when "Connecting..." appears.
 
**Arduino:** Check correct COM port selected in Tools → Port.
</details>
 
<details>
<summary><b>Sensor not detected</b></summary>
 
1. Check wiring (SDA/SCL not swapped?)
2. Run I2C scanner sketch to verify address
3. Add pull-up resistors (4.7kΩ) if not on module
4. Check voltage compatibility (3.3V vs 5V)
</details>
 
<details>
<summary><b>WiFi won't connect</b></summary>
 
1. Verify SSID/password in config.h (case-sensitive!)
2. 2.4GHz only (ESP32 doesn't support 5GHz)
3. Check router isn't blocking new devices
4. Try moving closer to router
</details>
 
<details>
<summary><b>Random resets</b></summary>
 
1. Power supply too weak - use 500mA+ source
2. Add 100µF capacitor near MCU
3. Check for short circuits
4. Disable brownout detector (ESP32)
</details>
 
### Still Stuck?
 
1. Check [Issues](https://github.com/[username]/[repo]/issues) for similar problems
2. Open a new issue with:
   - Hardware setup (board, sensors)
   - Error messages (full serial output)
   - Steps to reproduce
 
## 🤝 Contributing
 
Contributions are welcome! Here's how:
 
### Reporting Bugs
 
1. Check existing issues first
2. Use the bug report template
3. Include serial output and hardware details
 
### Suggesting Features
 
1. Open an issue with `[Feature Request]` prefix
2. Describe use case and expected behavior
 
### Pull Requests
 
1. Fork the repository
2. Create a feature branch: `git checkout -b feature/amazing-feature`
3. Make your changes
4. Test thoroughly
5. Commit: `git commit -m 'Add amazing feature'`
6. Push: `git push origin feature/amazing-feature`
7. Open a Pull Request
 
### Code Style
 
- Use meaningful variable names
- Comment complex logic
- Follow existing formatting
- Test on actual hardware before PR
 
## 📄 License
 
This project is licensed under the MIT License - see the [LICENSE](LICENSE) file for details.
 

 
## 🙏 Acknowledgments
 
- [Library/Project] - for [what it provides]
- [Person/Tutorial] - inspiration/guidance
- [Community] - testing and feedback
 
## 📬 Contact
 
**[Your Name]** - [@twitter_handle](https://twitter.com/handle) - email@example.com
 
Project Link: [https://github.com/[username]/[repo-name]](https://github.com/[username]/[repo-name])
 
---
 
⭐ If this project helped you, please give it a star!

❌ Bad: "An Arduino project with sensors"
✅ Good: "Battery-powered environmental monitor that tracks temperature, 
         humidity, and air quality, sending alerts when thresholds are exceeded"

❌ Bad: "Has WiFi"
✅ Good: "📶 WiFi connectivity with automatic reconnection and OTA updates"

❌ Bad: "Install the libraries and upload"
✅ Good: Step-by-step with screenshots, version numbers, exact menu paths

<!-- Status badges -->
![Build Status](https://img.shields.io/badge/build-passing-brightgreen)
![Version](https://img.shields.io/badge/version-1.0.0-blue)
![License](https://img.shields.io/badge/license-MIT-green)
 
<!-- Platform badges -->
![Arduino](https://img.shields.io/badge/platform-Arduino-00979D?logo=arduino)
![ESP32](https://img.shields.io/badge/platform-ESP32-blue)
![Raspberry Pi](https://img.shields.io/badge/platform-RPi_Pico-C51A4A)
 
<!-- Social badges -->
![GitHub stars](https://img.shields.io/github/stars/user/repo)
![GitHub forks](https://img.shields.io/github/forks/user/repo)

project-name/
├── README.md              # Main documentation
├── LICENSE                # MIT license file
├── .gitignore            # Ignore build files
├── src/
│   ├── main.ino          # Main sketch
│   └── config.h          # User configuration
├── lib/                  # Local libraries (optional)
├── docs/
│   ├── WIRING.md         # Detailed wiring guide
│   ├── API.md            # API documentation (if applicable)
│   └── CHANGELOG.md      # Version history
├── images/
│   ├── project-photo.jpg
│   ├── wiring-diagram.png
│   └── demo.gif
├── hardware/             # PCB/enclosure files (optional)
│   ├── schematic.pdf
│   └── enclosure.stl
└── examples/             # Additional example sketches
    └── basic/