affaan-m/everything-claude-code/homelab-network-setup
Claude Code and agent skill by affaan-m/everything-claude-code
- community
Checking that the SKILL.md file is still in the repository.
Practical home and homelab network planning for gateways, switches, access points, IP ranges, DHCP reservations, DNS, cabling, and common beginner mistakes. Use when planning or fixing a home or homelab network — gateway, switch, AP, IP ranges, DHCP, DNS, or cabling.
Install
npx vskill@latest install affaan-m/everything-claude-code/homelab-network-setupSKILL.md
The same SKILL.md was published earlier as affaan-m/everything-claude-code/homelab-network-setup.
Homelab Network Setup
Use this skill to design a home or small-lab network that can grow without needing a full rebuild.
When to Use
- Planning a new home network or redesigning an ISP-router-only setup.
- Choosing gateway, switch, and access point roles.
- Designing IP ranges, DHCP scopes, static reservations, and DNS.
- Preparing for future VLANs, Pi-hole, NAS, lab servers, or VPN access.
- Troubleshooting a new network that has double NAT, unstable Wi-Fi, or changing
server addresses.
How It Works
Start by separating device roles:
Pick a gateway that matches the operator, not just the feature checklist:
| Option | Best fit | Notes | |
|---|---|---|---|
| ISP router | Basic internet only | Limited control and often poor VLAN support | |
| UniFi gateway | Managed home network | Good UI, ecosystem lock-in | |
| OPNsense or pfSense | Flexible homelab | Strong VLAN, firewall, VPN, and DNS control | |
| MikroTik | Advanced network users | Powerful, but easy to misconfigure | |
| Linux router | Tinkerers | Document rollback before using as primary gateway |
IP Plan
Avoid the most common default, 192.168.1.0/24, when you expect to use VPNs. It often conflicts with hotels, offices, and ISP routers.
Use home.arpa for local names. It is reserved for home networks and avoids the leakage/conflict problems of ad hoc names like home.lan.
DHCP And DNS
- Use DHCP reservations for anything you SSH into, bookmark, monitor, or expose
as a service.
- Hand out the gateway as DNS until a local resolver is intentionally deployed.
- If using Pi-hole or another DNS filter, give it a reservation first, then point
DHCP DNS options at that address.
- Keep a small static/reserved range per subnet so replacements do not collide
with dynamic leases.
Cabling And Wi-Fi
- Prefer wired AP backhaul over mesh when you can run Ethernet.
- Use a PoE switch for APs and cameras if the budget allows it.
- Label both ends of each cable and keep a simple port map.
- Put the gateway, switch, DNS server, and NAS on UPS power if outages are common.
Examples
Beginner Upgrade
Goal: Keep the ISP router but stabilize a small lab.
- Set DHCP reservations for NAS, Pi, and any SSH hosts.
- Move local names to
home.arpa. - Disable duplicate DHCP servers on secondary routers or APs.
- Wire the main AP instead of relying on wireless backhaul.
VLAN-Ready Plan
Goal: Prepare for future segmentation without enabling it immediately.
- Choose non-overlapping /24 ranges for trusted, IoT, servers, guest, and
management.
- Reserve .1 for the gateway and .2-.49 for infrastructure on every subnet.
- Buy a gateway and switch that support VLANs and inter-VLAN firewall rules.
- Document which SSIDs and switch ports will eventually map to each network.
Anti-Patterns
- Double NAT without a reason or documentation.
- Using
192.168.1.0/24when VPN access is planned. - Dynamic addresses for NAS, Pi-hole, Home Assistant, or other service hosts.
- Consumer routers repurposed as APs while their DHCP servers are still enabled.
- Flat networks with cameras, smart plugs, laptops, and servers all sharing the
same trust boundary.
See Also
- Skill:
network-interface-health - Skill:
network-config-validation
Security
- Security scanPassed, 95 of 100Pattern checks on the skill's files.
- Model reviewPassed
Quality evaluation
- Task evaluationNot runNo evaluation yet. Run one in Skill Studio.
Source
- SKILL.md in the repositoryCheckingskills/homelab-network-setup/SKILL.md
Popularity
- Repository stars
- 183,828
- Repository forks
- 28,364
- Repository npm downloads, 7 days
- 1,807
- 7-day trend score
- 78
Stars and forks are for the whole GitHub repository, not this skill alone. Downloads are for the repository's npm package. Refreshed 16 May 2026, 6 months ago.
Works with
Any agent vskill installs to: 56 targets in all. These 39 have a page on this site.
- Claude Code
- Cursor
- GitHub Copilot
- Windsurf
- Codex
- Gemini CLI
- Cline
- Amp
- Roo Code
- Goose
- Continue
- Kilo Code
- Junie
- Trae
- OpenHands
- Qwen Code
- AI Agent
- Tabnine Chat
- Sourcegraph Cody
- Amazon Q
- Firebase Genkit
- Sweep
- Devin
- Phind
- Mentat
- Claude Desktop
- Aider
- GPT Pilot
- Plandex
- bolt.new
- v0
- Replit Agent
- Anse
- TypingMind
- BetterChatGPT
- LibreChat
- Warp AI
- Pieces
- Fig AI
Embed badge
[](https://verified-skill.com/skills/affaan-m/everything-claude-code/homelab-network-setup)