mp-ai-20/mechanical-engineering-skills/acoustic-fatigue
Claude Code and agent skill by mp-ai-20/mechanical-engineering-skills
- community
Checking that the SKILL.md file is still in the repository.
Acoustic fatigue — random acoustic loading on panels, SPL/OASPL, Miner's rule for random fatigue, Miles equation, panel response, jet engine exhaust, MIL-STD-1530, ESDU 84008.
Install
npx vskill@latest install mp-ai-20/mechanical-engineering-skills/acoustic-fatigueSKILL.md
The same SKILL.md was published earlier as mp-ai-20/mechanical-engineering-skills/acoustic-fatigue.
Acoustic Fatigue — Complete Skill
Acoustic Loading Fundamentals
Sound Pressure Level (SPL): SPL = 20 log₁₀(p_rms / p_ref) [dB; p_ref = 20 μPa in air]
Overall SPL (OASPL): OASPL = 10 log₁₀[Σ 10^(SPL_i/10)] [dBSPL; sum over frequency bands] Typical jet exhaust near field: OASPL = 155–175 dB
Power Spectral Density (PSD) of pressure: G_p(f) = p_rms² / Δf [Pa²/Hz]; relates to SPL per Hz
Root mean square pressure: p_rms = √[∫G_p(f)df] [Pa; integral over frequency range]
Structural Response to Random Acoustic Loading
Panel equation of motion (thin plate): m ẍ + c ẋ + k x = p(x,y,t) [distributed pressure loading]
Modal approach: decompose response into structural modes x(t) = Σ q_i(t) × φ_i(x,y) [q_i = modal coordinates; φ_i = mode shapes]
Frequency response of mode i: H_i(f) = 1/[k_i × (1 - (f/f_i)² + 2jζ_i(f/f_i))] k_i = modal stiffness; f_i = natural frequency; ζ_i = modal damping (typically 0.01–0.03)
RMS response (Miles equation — single mode approximation): G_x,rms = √[π × f_n × G_p(f_n) / (4 × ζ)] [displacement PSD integrated at resonance]
Miles equation for acceleration: a_rms = √[π × f_n³ × G_p(f_n) / (2 × m_modal² × ζ)] [m/s²]
Stress Response
Bending stress from acoustic loading on flat plate: σ_rms = C_s × p_rms × (a/t)² [Pa; C_s = stress concentration factor for panel geometry] For simply supported rectangular panel: σ_max = (1.5 × p × a²) / t² [Pa; a = shorter side; t = thickness; uniform pressure]
PSD of stress: G_σ(f) = |H_σ(f)|² × G_p(f) [Pa²/Hz] σ_rms = √[∫G_σ(f)df]
Fatigue Analysis for Random Loading
Rayleigh Distribution of Stress Peaks
For narrow-band random process (response dominated by single mode): Peak stress amplitudes follow Rayleigh distribution: P(σ_a) = (σ_a/σ_rms²) × exp(-σ_a²/(2σ_rms²))
Expected number of peaks per second: n_p = f_0 [Hz; center frequency of response]
Miner's Rule Integration (Rayleigh peaks)
Cumulative damage per unit time: D/T = n_p × ∫₀^∞ [p(σ_a) / N(σ_a)] dσ_a
S-N curve: N(σ_a) = (σ_a / σ_f')^(-1/b) [b = fatigue exponent; σ_f' = fatigue strength coefficient]
Closed-form (Rayleigh distribution): D/T = n_p / N_f(σ_rms) × [Γ(1 + 1/m) × 2^(1/m)] m = S-N slope; Γ = gamma function; applicable when S-N is linear in log-log
Fatigue life: T_failure = 1 / (D/T) [seconds]
Equivalent Constant Amplitude Stress (Simplified)
σ_eq = k × σ_rms [k ≈ 3.0 for 0.1% probability; k = 4.0 for 0.01%] Use σ_eq in standard fatigue analysis
Acoustic Fatigue Sources
Jet engine exhaust: OASPL profile: peaks 3–6 nozzle diameters downstream; noise spectrum peaks at Strouhal St ≈ 0.2 Near-field: 150–175 dB OASPL; far field: 140–165 dB at 10 m
Cavity resonance (bomb bays, wheel wells): Rossiter modes: f_n = (U/L) × (n - α) / (M + 1/κ) [U = freestream; L = cavity length; M = Mach; α, κ empirical] SPL peaks: 160–180 dB in cavities; major acoustic fatigue driver on fighter aircraft
Turbulent boundary layer (TBL): Pressure PSD on aircraft skin: G_p ≈ τ_w² δ / (U_e) × f(kL) [τ_w = wall shear; δ = boundary layer thickness] Typical: OASPL 130–145 dB on high-speed aircraft fuselage panels
Panel Design for Acoustic Fatigue
Structural countermeasures:
- Increase panel natural frequency above acoustic spectral peak: f_n = (π/2) √(D/m) × (1/a² + 1/b²)
D = Et³/[12(1-ν²)] [flexural rigidity]
- Add damping treatment: constrained layer damping; SMACWRAP; target ζ ≥ 0.03
- Reduce aspect ratio (a/b → 1.0 reduces fundamental mode stress)
- Frame/stiffener spacing: controls panel first mode frequency
Allowable OASPL (aircraft panels, Dural/Al alloy): Without treatment: OASPL ≤ 135–140 dB for > 10⁷ cycle life With damping: OASPL ≤ 145–150 dB
Standards and References
| Standard | Scope | |
|---|---|---|
| MIL-STD-1530D | Aircraft structural integrity; acoustic fatigue requirement | |
| MIL-HDBK-516C | Airworthiness certification criteria | |
| ESDU 84008 | Acoustic fatigue; panel response analysis | |
| ESDU 74020 | TBL pressure fluctuations | |
| NASA SP-8002 | Acoustic loads on launch vehicles | |
| DO-160G Section 7 | Acoustic environment testing |
Output
Provide: OASPL and spectral distribution [dB vs. Hz], panel natural frequency f_n [Hz] and mode shape, modal damping ζ, RMS stress σ_rms [MPa] (Miles equation), equivalent fatigue stress σ_eq [MPa], predicted cycles-to-failure N_f, fatigue life T [hours], Miner cumulative damage per 1000 hr, design recommendations (f_n target, damping treatment, panel sizing), and applicable standard (MIL-STD-1530, ESDU 84008).
Security
- Security scanPassed, 90 of 100Pattern checks on the skill's files.
- Model reviewPassed
Quality evaluation
- Task evaluationNot runNo evaluation yet. Run one in Skill Studio.
Source
- SKILL.md in the repositoryCheckingskills/acoustic-fatigue/SKILL.md
Popularity
- 7-day trend score
- 0
Not refreshed yet.
Works with
Any agent vskill installs to: 56 targets in all. These 39 have a page on this site.
- Claude Code
- Cursor
- GitHub Copilot
- Windsurf
- Codex
- Gemini CLI
- Cline
- Amp
- Roo Code
- Goose
- Continue
- Kilo Code
- Junie
- Trae
- OpenHands
- Qwen Code
- AI Agent
- Tabnine Chat
- Sourcegraph Cody
- Amazon Q
- Firebase Genkit
- Sweep
- Devin
- Phind
- Mentat
- Claude Desktop
- Aider
- GPT Pilot
- Plandex
- bolt.new
- v0
- Replit Agent
- Anse
- TypingMind
- BetterChatGPT
- LibreChat
- Warp AI
- Pieces
- Fig AI
Embed badge
[](https://verified-skill.com/skills/mp-ai-20/mechanical-engineering-skills/acoustic-fatigue)