mp-ai-20/mechanical-engineering-skills/active-vibration-control
Claude Code and agent skill by mp-ai-20/mechanical-engineering-skills
- community
Checking that the SKILL.md file is still in the repository.
Active vibration control (AVC) — feedforward/feedback architectures, filtered-x LMS, piezoelectric actuators, active mounts, AMD, ANC, stability, hardware, applications.
Install
npx vskill@latest install mp-ai-20/mechanical-engineering-skills/active-vibration-controlSKILL.md
The same SKILL.md was published earlier as mp-ai-20/mechanical-engineering-skills/active-vibration-control.
Active Vibration Control — Complete Skill
System Architecture
Feedforward Control
Principle: Reference signal correlated with disturbance → predict and cancel Application: periodic/tonal disturbances (engine orders, unbalance)
Filtered-x LMS (FxLMS) algorithm: y(n) = w^T(n) x(n) [actuator signal; w = adaptive filter weights; x = reference] e(n) = d(n) + y_actual(n) [error = disturbance + control response] Update: w(n+1) = w(n) - μ × e(n) × x'(n) [gradient descent; μ = step size] x'(n) = filtered reference through secondary path model G_hat
Secondary path: transfer function from actuator to error sensor Must be identified (offline or online) for stability Convergence: stable if μ < 1 / (λ_max × ||G_hat||²)
Feedback Control
Principle: measure vibration → control law → actuate to suppress Application: broadband disturbances; non-deterministic sources
PID-based: u(t) = K_p e + K_i ∫e dt + K_d de/dt (e = displacement or acceleration error) Stability: phase margin ≥ 30°; avoid resonances in open-loop plant
H∞ robust control: Minimize ||T_zw||∞ (worst-case energy from disturbance w to performance z) Handles model uncertainty; more complex design MATLAB: hinfsyn command
Sky-hook damping: F_control = -c_sky × ẋ_body (virtual damper connected to inertial reference) Effective for isolation; implemented via inertial sensor (accelerometer + integrator)
Actuator Types
Piezoelectric Actuators
PZT (Lead Zirconate Titanate): Strain: ε = d₃₃ × E_field = d₃₃ × V/t_pzt d₃₃ ≈ 400–600 pm/V; typical stroke: 0.1–0.5% strain Blocking force: F = d₃₃ × E × A_pzt [N] Bandwidth: DC to 100s of kHz (stiff actuator; high resonance frequency)
Stack actuator: layers of PZT; stroke ∝ n_layers; stiffness ∝ 1/n_layers Patch actuator: bonded to structure; bending excitation; lower force but distributed
Limitations: high voltage (100–1000V); brittle; low displacement; hysteresis (5–20%) Hysteresis compensation: feedforward model or charge amplifier drive
Voice Coil (Electromagnetic)
Linear motor: F = B L i (B = flux, L = wire length, i = current) High bandwidth; mid-range force; limited stroke Used in: hard drives, vibration isolators, seismic isolators
Magnetostrictive (Terfenol-D)
Strain: ε = d_mag × H (H = applied magnetic field) Strain levels: up to 0.2% (larger than PZT) High force; moderate bandwidth; simpler drive circuit (current control)
Active Isolation
Active engine mount: Piezo or EM actuator in parallel with passive mount Secondary path from actuator to chassis sensor FxLMS control for engine order cancellation Typical: 20–40 dB attenuation at engine orders
Active vibration isolation table (semiconductor): 6-DOF control; pneumatic actuators + voice coils Achieves < 1 nm RMS in vertical (for lithography tools) Transmissibility < -60 dB at 10 Hz+
Active Mass Damper (AMD)
Large moving mass driven by actuator (hydraulic, EM) to counteract building motion AMD reaction: F = m_a × ẍ_a acts on building Used in: skyscrapers (Taipei 101 pendulum-based; Yokohama Landmark Tower AMD)
Control: feed back building velocity or acceleration; command AMD to generate opposing force HMD (Hybrid Mass Damper): passive TMD + active actuator → better performance + smaller mass
Active Noise Control (ANC)
1D duct (in-plane): antisound from speaker cancels noise from source FxLMS; reference from upstream microphone; error at downstream microphone
Headphones (ANC): Feedforward: microphone outside → cancel before reaching ear Feedback: internal mic monitors residual → suppress Combined hybrid: best performance across frequencies
Performance limits: Sound speed constrains maximum control point separation Works well below ~500 Hz (wavelength > control geometry) Causality: control system latency must be less than acoustic propagation time
Stability Considerations
Spillover: control of low modes may excite higher (unmodeled) modes Spatial filtering helps (distributed sensors/actuators) Sensor-actuator collocation: if sensors and actuators collocated → passivity → guaranteed stability Non-collocated: requires careful stability analysis; potential for instability
Hardware
Sensors: accelerometer (piezo; sensitivity 1–1000 mV/g), LVDT (position), laser vibrometer DAQ: 24-bit ADC; sampling rate ≥ 10× max control frequency Amplifier: voltage amplifier (PZT); power amplifier (EM, voice coil) Controller: DSP (TI C28xx, ADSP), FPGA (National Instruments, Speedgoat), dSPACE, Speedgoat
Output
Provide: control architecture (feedforward/feedback), algorithm (FxLMS/PID/H∞), actuator type and specifications (stroke [μm], force [N], bandwidth [Hz]), sensor selection, sampling rate, expected attenuation [dB] at target frequencies, stability margin.
Security
- Security scanPassed, 90 of 100Pattern checks on the skill's files.
- Model reviewPassed
Quality evaluation
- Task evaluationNot runNo evaluation yet. Run one in Skill Studio.
Source
- SKILL.md in the repositoryCheckingskills/active-vibration-control/SKILL.md
Popularity
- 7-day trend score
- 0
Not refreshed yet.
Works with
Any agent vskill installs to: 56 targets in all. These 39 have a page on this site.
- Claude Code
- Cursor
- GitHub Copilot
- Windsurf
- Codex
- Gemini CLI
- Cline
- Amp
- Roo Code
- Goose
- Continue
- Kilo Code
- Junie
- Trae
- OpenHands
- Qwen Code
- AI Agent
- Tabnine Chat
- Sourcegraph Cody
- Amazon Q
- Firebase Genkit
- Sweep
- Devin
- Phind
- Mentat
- Claude Desktop
- Aider
- GPT Pilot
- Plandex
- bolt.new
- v0
- Replit Agent
- Anse
- TypingMind
- BetterChatGPT
- LibreChat
- Warp AI
- Pieces
- Fig AI
Embed badge
[](https://verified-skill.com/skills/mp-ai-20/mechanical-engineering-skills/active-vibration-control)