mp-ai-20/mechanical-engineering-skills/axial-compressor

Claude Code and agent skill by mp-ai-20/mechanical-engineering-skills

Trust tier 3
  • community
Source check pending

Checking that the SKILL.md file is still in the repository.

Axial compressor design — Euler work equation, degree of reaction, velocity triangles, stage loading/flow coefficient, stall/surge, polytropic efficiency, annulus sizing, blade profiles, NASA SP-36.

Install

npx vskill@latest install mp-ai-20/mechanical-engineering-skills/axial-compressor

SKILL.md

The same SKILL.md was published earlier as mp-ai-20/mechanical-engineering-skills/axial-compressor.

Axial Compressor Design — Complete Skill

Euler Turbomachinery Equation

Stage work: W_stage = U₂ C_θ2 - U₁ C_θ1 [J/kg; U = blade speed; C_θ = absolute tangential velocity; subscripts 1=inlet, 2=exit of rotor]

Stagnation enthalpy rise: Δh₀ = W_stage = U(C_θ2 - C_θ1) = U ΔC_θ [J/kg; for constant radius U₁ = U₂ = U]

Stage pressure ratio: π_stage = (1 + Δh₀ × η_p / (c_p T₀₁))^(γ/(γ-1)) [η_p = polytropic efficiency; T₀₁ = inlet stagnation T]

Velocity Triangles

Convention: C = absolute velocity; W = relative velocity; U = blade speed C_θ, W_θ = tangential components; C_a = W_a = axial velocity (radially constant in simplified 2D)

Velocity triangle (inlet to rotor, blade station 1): W_θ1 = C_θ1 - U [relative swirl at rotor inlet; for zero inlet swirl C_θ1 = 0] W₁ = √(C_a² + W_θ1²); β₁ = atan(W_θ1 / C_a) [relative flow angle]

Velocity triangle (exit from rotor, blade station 2): C_θ2 = W_θ2 + U W₂ = √(C_a² + W_θ2²); β₂ = atan(W_θ2 / C_a)

Stage work in terms of angles: ΔC_θ = C_a (tan α₂ - tan α₁) = C_a (tan β₁ - tan β₂) [α = absolute angle; β = relative angle]

Non-Dimensional Parameters

Stage loading coefficient ψ: ψ = Δh₀ / U² = ΔC_θ / U = C_a/U × (tan β₁ - tan β₂)

Flow coefficient φ: φ = C_a / U [typical 0.4–0.8 for subsonic stages]

Degree of reaction R: R = static enthalpy rise in rotor / total stage enthalpy rise R = 1 - (C_θ1 + C_θ2) / (2U) = 1 - ψ/2 - φ(tan α₁ + tan α₂)/2

Practical designs: R = 0.5 (symmetric; equal loading on rotor and stator) For R = 0.5: α₁ = β₂; α₂ = β₁; blade shapes are mirror images

Design point target (subsonic single stage): ψ = 0.3–0.5; φ = 0.5–0.7; R = 0.5; efficiency η_s = 0.88–0.92

Blade Loading and Diffusion Factor

Diffusion factor D (Lieblein): D = 1 - W₂/W₁ + |ΔW_θ| / (2σ W₁) σ = c/s = chord-to-spacing (solidity); typically σ = 1.0–1.5

Design limit: D ≤ 0.45–0.50 (rotor); D ≤ 0.40–0.45 (stator) — above this, blade boundary layer separates → stall

Equivalent diffusion factor (de Haller number): de Haller = W₂/W₁ ≥ 0.72 (for attached flow; = 1 - 0.28 ≈ 0.72)

Annulus Design

Continuity equation: ṁ = ρ₁ C_a1 A₁ = ρ₂ C_a2 A₂ [mass flow; A = annular area] A = π (r_tip² - r_hub²) = π(1 - (r_hub/r_tip)²) r_tip²

Hub-to-tip ratio (htr): At inlet: htr = r_hub/r_tip; typical 0.4–0.7 Low htr: high mass flow but high 3D effects; high htr: more uniform flow

Mean radius and blade speed: r_mean = (r_hub + r_tip)/2; U_mean = ω × r_mean [m/s] Tip speed: U_tip = ω × r_tip ≤ 400 m/s (subsonic); 350–500 m/s (transonic front stage)

Aspect ratio (span/chord): AR = h / c; typical 1.0–3.0 (modern low AR preferred for better stall margin)

Mach Number Effects

Relative inlet Mach number: M_rel,1 = W₁ / a₁ [a₁ = sound speed at rotor inlet] Subsonic stage: M_rel,1 < 0.8; transonic: M_rel,1 = 0.9–1.3

Tip Mach number: M_tip = U_tip / a₀ [reference to inlet sound speed] M_tip < 1.0 → subsonic; M_tip 1.2–1.5 → transonic (most modern first stages)

Shock losses (transonic): η_s decreases ~1.5–3% per 0.1 increase in M_tip above 1.0

Stall and Surge

Rotating stall: local separation of flow → blade cells rotate at 50–70% of rotor speed Surge: full annulus flow breakdown → periodic flow reversal; damaging to compressor Stall margin (SM): SM = [(π_stall - π_design) / π_design] × 100% [%] Acceptable SM ≥ 15% (aircraft engines); 10% (industrial compressors)

Stall inception: Modal stall: long wavelength disturbance; builds slowly; good warning Spike stall: short wavelength spike; fast; difficult to detect

Active surge control: Bleed valves; inlet guide vane modulation; active magnetic bearing damping

Polytropic and Isentropic Efficiency

Polytropic efficiency η_p: η_p = [(γ-1)/γ] × (ln π_stage) / (ln T₀₂/T₀₁) [for gas stages]

Isentropic efficiency η_is: η_is = (T₀₂_is - T₀₁) / (T₀₂_actual - T₀₁) = (π^((γ-1)/γ) - 1) / (T₀₂/T₀₁ - 1)

Typical multistage compressor: η_p = 0.88–0.92; η_is = 0.85–0.90 (n-stage builds up difference)

Compressor Map

Parameters:

  • x-axis: corrected mass flow ṁ_c = ṁ√(T₀₁/T_ref) / (P₀₁/P_ref)
  • y-axis: pressure ratio π
  • Lines of constant corrected speed N_c = N/√(T₀₁/T_ref)
  • Surge line: left limit; choke line: right limit (vertical)

Operating line (engine + nozzle match): Turbine/nozzle area dictates back pressure → operating line slope ≈ constant β line

Standards and References

ReferenceScope
NASA SP-36Aerodynamic design of axial-flow compressors
AGARD-AG-10Axial flow turbines and compressors
Dixon & Hall"Fluid Mechanics and Thermodynamics of Turbomachinery"
ASME PTC-10Performance test code for compressors

Output

Provide: stage loading ψ, flow coefficient φ, degree of reaction R, blade speed U [m/s], axial velocity C_a [m/s], velocity triangle angles α₁, α₂, β₁, β₂ [°], diffusion factor D [rotor and stator], tip and hub-to-tip ratio, stage pressure ratio π, stage efficiency η_s [%], number of stages N for total pressure ratio, stall margin SM [%], and reference (NASA SP-36).

Security

  • Security scanPassed, 90 of 100Pattern checks on the skill's files.
  • Model reviewPassed

Quality evaluation

  • Task evaluationNot runNo evaluation yet. Run one in Skill Studio.

Source

Popularity

7-day trend score
0

Not refreshed yet.

Works with

Any agent vskill installs to: 56 targets in all. These 39 have a page on this site.

  • Claude Code
  • Cursor
  • GitHub Copilot
  • Windsurf
  • Codex
  • Gemini CLI
  • Cline
  • Amp
  • Roo Code
  • Goose
  • Continue
  • Kilo Code
  • Junie
  • Trae
  • OpenHands
  • Qwen Code
  • AI Agent
  • Tabnine Chat
  • Sourcegraph Cody
  • Amazon Q
  • Firebase Genkit
  • Sweep
  • Devin
  • Phind
  • Mentat
  • Claude Desktop
  • Aider
  • GPT Pilot
  • Plandex
  • bolt.new
  • v0
  • Replit Agent
  • Anse
  • TypingMind
  • BetterChatGPT
  • LibreChat
  • Warp AI
  • Pieces
  • Fig AI
Embed badge
vskill VERIFIED badge
[![vskill VERIFIED](https://verified-skill.com/api/v1/skills/mp-ai-20/mechanical-engineering-skills/axial-compressor/badge)](https://verified-skill.com/skills/mp-ai-20/mechanical-engineering-skills/axial-compressor)

Something wrong with this skill or its page? Tell us.