posthog/posthog/choosing-trend-or-slope-view

Claude Code and agent skill by posthog/posthog

Trust tier 3
  • community
Source check pending

Checking that the SKILL.md file is still in the repository.

Clarify how to visualize change over a time range before building a trend. Use whenever the user asks how much something changed, grew, dropped, improved, or regressed between two points or periods — "how much did X change from A to B", "before vs after", "start vs end", "week over week", "compare this month to last", "change over time" — or mentions a "slope chart" / "slopegraph". Two readings of "change" need different charts: the whole trend (a line, every interval) versus just the two endpoints (a slope, start vs end). Ask which they want, then render it. Not for choosing a saved insight ChartDisplayType in the insight editor.

Install

npx vskill@latest install posthog/posthog/choosing-trend-or-slope-view

SKILL.md

The same SKILL.md was published earlier as posthog/posthog/choosing-trend-or-slope-view.

Choosing a trend line vs a slope view

"How did X change between A and B?" is ambiguous. Two charts answer two different questions, so clarify before you build unless the user already named one:

  • Change over time (line) — the value at every interval across the range.

Shows the _path_: dips, spikes, when it moved. This is the default trend.

  • Start vs end (slope) — only the first and last point, one line per series

connecting them. Shows the _net change_ and, across many series, which rose, which fell, and any rank flips — without the noise of the path between.

When the request could be either, ask a short either/or, e.g.:

Do you want to see how it moved across the whole period (a line chart), or just
the change from the start to the end (a slope chart)?

If the user clearly wants one — "just tell me how much it grew start to end" → slope; "show me the trend / when did it spike" → line — skip the question and build it.

How to render each

Both come from the same TrendsQuery over the same date range — the slope is that series collapsed to its first and last point, not a different query.

Change over time → line

Default trends behavior. Create or run a TrendsQuery and leave trendsFilter.display as ActionsLineGraph (the default, "change over time"):

json
{
"kind": "TrendsQuery",
"series": [{ "kind": "EventsNode", "event": "$pageview", "math": "total" }],
"dateRange": { "date_from": "2025-01-01", "date_to": "2025-03-31" },
"trendsFilter": { "display": "ActionsLineGraph" }
}
Start vs end → slope

Run the trend with posthog:query-trends. The result card Max renders has a Line / Bar / Slope view toggle — switch it to Slope to show each series as a single line from its first to its last point, with the per-series change in the legend. Tell the user they can flip to the Slope view on the result.

The slope view is best for a clean before→after comparison, especially with several series/categories whose relative movement matters. Pick a date range whose two ends are the points you want compared (the slope uses the first and last interval).

Important limits

  • Two surfaces, one computation. Both the inline slope (Max's query-trends

result card) and the saved-insight slope (ChartDisplayType.SlopeGraph) show the same thing: the first interval's value vs the last interval's value, at the chosen group-by interval. The grouping defines the slope - group by month to compare the first vs last month, by day for the first vs last day. Use the inline view for a quick before-and-after on a result you're already looking at; use the saved display to persist it on a dashboard. A still-accumulating final period is shown as-is with a dashed connector, the same affordance the line chart uses for an incomplete tail.

  • For period-over-period on a single series (this month vs last), a line with

compareFilter: { "compare": true } overlays the two periods; a slope is the better fit when comparing the endpoints of many series at once.

Security

  • Security scanPassed, 100 of 100Pattern checks on the skill's files.
  • Model reviewPassed

Quality evaluation

  • Task evaluationNot runNo evaluation yet. Run one in Skill Studio.

Source

Popularity

Repository stars
39,987
Repository forks
3,435
7-day trend score
53

Stars and forks are for the whole GitHub repository, not this skill alone. Not refreshed yet.

Works with

Any agent vskill installs to: 56 targets in all. These 39 have a page on this site.

  • Claude Code
  • Cursor
  • GitHub Copilot
  • Windsurf
  • Codex
  • Gemini CLI
  • Cline
  • Amp
  • Roo Code
  • Goose
  • Continue
  • Kilo Code
  • Junie
  • Trae
  • OpenHands
  • Qwen Code
  • AI Agent
  • Tabnine Chat
  • Sourcegraph Cody
  • Amazon Q
  • Firebase Genkit
  • Sweep
  • Devin
  • Phind
  • Mentat
  • Claude Desktop
  • Aider
  • GPT Pilot
  • Plandex
  • bolt.new
  • v0
  • Replit Agent
  • Anse
  • TypingMind
  • BetterChatGPT
  • LibreChat
  • Warp AI
  • Pieces
  • Fig AI
Embed badge
vskill VERIFIED badge
[![vskill VERIFIED](https://verified-skill.com/api/v1/skills/posthog/posthog/choosing-trend-or-slope-view/badge)](https://verified-skill.com/skills/posthog/posthog/choosing-trend-or-slope-view)

Something wrong with this skill or its page? Tell us.